FIRE HOSE REEL WITH SEMI-RIGID HOSE (AS/NZS 1221)
PRODUCT DESCRIPTION
NAFFCO fire hose reels provide a very effective fire fighting facility with a continuous supply of water available immediately. The construction and performance of a fire hose reel with semi-rigid hose ensures suitable installation in buildings and other construction works for use by the occupants. The fire hose reels are manufactured in both manual and automatic versions to comply to Bs EN 671-1:2012 standard with semi-rigid hose complying with EN 694:2001 standards.
FEATURES
- Australian & New Zealand Standard AS/NZS 1221, certified by Global-Mark Pty Ltd.
- The fire hose reels are capable of rotating in one plane (fixed type)or rotating in more than one plane with mounting on one of the following: swinging arm, swinging pipe or swinging door in manual and automatic version.
- The automatic fire hose reels will open fully within 3 revolution of the reel.
- The nozzle has SHUT, JET and SPRAY control settings.
- The minimum flow rate of hose reels in JET and SPRAY setting at 220 kpa pressure; for 13mm nozzle is 0.24 L/S, for 19mm nozzle is 0.45 L/S and for 25mm nozzle is 0.55 L/S.
- The effective throw range of discharge at 0.2 MPa (2 bar) pressure is 10 mtrs. in JET setting.
- The reel discs are painted RED with printed user instructions.
KITEMARK AND LPCB APPROVED HOSE, TYPE 2
PRODUCT DESCRIPTION
Single jacket fire hose consists of an impermeable elastomeric lining, a synthetic fibre reinforcement and externally applied elastomeric coating to the reinforcement. Delivery hoses are non-percolating lay flat type used in fire fighting purposes. Hoses are suitable for use with couplings with the requirements of BS 336:2010 standards. Hose is intended for use at working pressure not exceeding 15 bar. Delivery hose are manufactured to comply BS 6391: 2009 Standards.
FEATURES
- BSI Kitemark and LPCB Certified.
- Light weight and flexible.
- Hose belongs to Type 2 with Elastomeric lining, Synthetic fibre reinforcement and elastomeric coating on the reinforcement.
- Hose provides good protection against the absorption of liquids and resistance of the reinforcement.
- Anti rot and anti twist.
- Hose with couplings are wound by Galvanized mild steel / SS wire.
UL LISTED HOSE
PRODUCT DESCRIPTION
The single jacket fire hose consists of 100% polyester plain-woven synthetic and natural rubber linings. This fire hose has very good resistance to ageing and abrasion. The light fire hose is suitable for normal situation.
The single jacket hose made of high tenacity polyester staple and polyester filaments. Lining is natural rubber. Jacket is plain. There is a special adhesion between the jacket and the rubber.
FEATURES
- This durable, double jacket hose is constructed of 100% high tensile strength polyester yarns, both wrap and filler, and lined with a high-tech EPDM tube. Its engineered design guarantees minimum weight with maximum durability and flexibility. The UL Listed Double Jacket Fire Hose and its assemblies under these specifications shall be constructed with superior quality materials, manufactured in accordance with National Fire
PRESSURE REDUCING VALVE, FLANGED INLET
PRODUCT DESCRIPTION
NAFFCO pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.
These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar -12 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure upto 20 bar.
FEATURES
- BsI Kitemark approved.
- Body material made of copper alloy to EN 1982. • Hand wheel material made of grey cast iron to Bs EN 1561.
- Blank cap material made of copper alloy to EN 1982. • Possible to replace the gland seal when under pressure with the valve fully closed.
- Disc facing rubber are of replaceable type.
- Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
- The hand is painted black and the body is painted red.
OBLIQUE VALVE, MALE THREADED INLET
PRODUCT DESCRIPTION
NAFFCO landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply.
The landing valves are oblique type with threaded inlet and are manufactured to comply to Bs 5041 Part 1 standard with delivery hose connection and blank cap complying with Bs 336:2010 standard.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.
FEATURES
- BsI Kitemark approved.
- Body material made of copper alloy to EN 1982
- Hand wheel material made of grey cast iron to Bs EN 1561.
- Blank cap material made of copper alloy to EN 1982.
- Possible to replace the gland seal when under pressure with the valve fully closed.
- Disc facing rubber are of replaceable type.
- Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
- The hand wheel is BLACK painted and body to RED.
LANDING VALVES OBLIQUE VALVE, FLANGED INLET
PRODUCT DESCRIPTION
NAFFCO landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply.
The landing valves are oblique type with flanged inlet and are manufactured to comply to Bs 5041 Part 1 standard with delivery hose connection and blank cap complying with Bs 336:2010 standard.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.
FEATURES
- BSI Kitemark and LPCB certified.
- Body material made of copper alloy to EN 1982
- Hand wheel material made of grey cast iron to Bs EN 1561.
- Blank cap material made of copper alloy to EN 1982.
- Possible to replace the gland seal when under pressure with the valve fully closed.
- Disc facing rubber is of replaceable type.
- Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
- The hand wheel is BLACK painted and body to RED.
FIRE BLANKET
PRODUCT DESCRIPTION
Fire blankets are made of fire resistant glass fiber fabric with silicone coating. It is primarily intended for extinguishing cooking oil fires in the kitchen.
FEATURES
- NAFFCO’s blankets are electrical resistant not less than 1M to ensure that in the event of use where live electrical equipment is concerned, the potential for an electrical shock is minimised
- NAFFCO’s fire blanket can be released and can be covered on the flame in LESS THAN FIVE SECONDS
- It is an excellent fire extinguisher in a car, boat, caravan or holiday home and we recommend that each family have at least one for fire safety purpose. Fire blankets can be used to extinguish fires in electrical appliances (toaster, coffee maker, etc.) rubbish bins, clothes and table top fires caused by candles or fat pan fires. Fire blankets can also be used to wrap around a person whose clothing is on fire.
DRY PILLAR FIRE HYDRANTS
FEATURES
- LPCB approved
- NAFFCO Fire Hydrants are manufactured to comply Bs EN 14384: 2005, Bs 1074-1, Bs 1074-2 & Bs 1074-6 standards.
- Dry barrel design eliminates damage to the hydrant caused by freezing of the upper part.
- NAFFCO Fire Hydrants are designed for high performance and easy to install, maintain and repair.
- Excellent and proven flow characteristics.
- 2 x ½” straight through landing valve with female instantaneous outlet to Bs 336:2010.
- Body material made of spheroidal graphite cast iron (Ductile Iron) to Bs 1563:2011.
- 2 x ½” Female Instantaneous quick coupling adaptor to Bs 336:2010.
- 1 x 4” Male/Female BsRT pumper to Bs 336:2010.
- Aluminum Hood / GRP cover is provided for protection and misusing.
- Operation threads are corrosion protected and for easy operation.
- NAFFCO Fire Hydrants are high Pressure rating to 16 Bar.
- Drain starts automatically when hydrant is closed.
- Internal epoxy paint system gives high corrosion protection to hydrants.
- Hydrant protective covers with handle for easy handling.
CABINET FOR FIRE HOSE REEL, FIRE EQUIPMENT AND BREECHING INLET
PRODUCT DESCRIPTION
AFFCO cabinets are designed to accommodate fire hose reel, fire fighting equipment and breeching inlet. Fire hose reel cabinets are manufactured to comply with BsEN 671-1
FEATURES
- standard and breeching inlet cabinets are manufactured to comply to Bs 5041 -5 standard.
- LPCB Certified.
- Cabinet material made of Electro Galvanized sheet or stainless steel sheet (Full stainless steel brush or mirror finish).
- Locking of cabinet is either key operated or round handle cam latch.
- Cabinets are available either in surface mounted or recessed mounted type.
- Cabinet door shall be solid door.
- Breeching inlet cabinets are available in horizontal or vertical version
THROUGH-PENETRATION FIRESTOP SYSTEM
PRODUCT DESCRIPTION
NAFFCO proudly manufactures fire-rated cabinets for use in fire-rated assemblies. Underwriters Laboratories, Inc. has classified and listed NAFFCO fire-rated cabinets for combustible and non-combustible wall systems.
The cabinets are tested to ASTM E814 or UL1679 results in hourly rating SPECIFICATIONS Model Cabinet Material Fire Rating Maximum Size** Cabinet to Accomodate Door Type NF/500FRCG ELV Series 1.2mm E.G. Steel or 1.2mm Stainless Steel* F-Rating: 2Hours T-Rating: 2 Hours 1146mm(H) X 485.5mm(W) X 225mm(D) Fire Extinguisher Clear Ceramic Glass Door SPECIFICATIONS Model Cabinet Material Fire Rating Maximum Size** Cabinet to Accomodate Door Type NF/FRC600 HRE Series 1.2mm E.G.
Steel or 1.2mm Stainless Steel* F-Rating: 2Hours T-Rating: 2 Hours 879.5 mm(H) X 981 mm(W) X 300 mm(D) Fire Hose Rack & Extinguisher or Fire Hose Reel & Extinguisher Solid Door of 2 hour for both flame (“F”) and temperature transfer(“T”).
The fire-rated option eliminates the costly need to line the wall opening with fire-rated material. It also provides the specified assurance in maintaining the integrity of the wall penetration and in meeting building code specifications.
PRE-PIPED VERTICAL FOAM BLADDER TANK
PRODUCT DESCRIPTION
The NAFFCO Pre-piped Bladder tank is an integral component of balanced pressure proportioning system. Its operation requires no external power other than a pressurized water system. NAFFCO bladder tank, with an appropriate proportioner, injects foam concentrate into the water supply of a fire protection system and automatically proportions at wide range of flows and pressures. NAFFCO Pre-piped Foam bladder tank is a steel pressure vessel fitted with an Internal Elastomeric bladder that stores foam concentrate. During operation, the concentrate is discharged by incoming water pressure to the bladder tank until the concentrate is depleted. The bladder tank discharges foam concentrate at approximately the same pressure as the water supplied at the water inlet connection to the tank. Since the bladder tank is pressurized, the bladder should not be refilled during operation.
FEATURES
- UL listed
- Pre-piped bladder tank offers the foam system designer fixed dimensions and eliminates uncertainty during sizing of foam equipment room and piping layout.
- Pre-fabricated foam bladder proportioning system eliminates loose components and simplifies the installation.
- Bladder is manufactured of a vinyl based polymer as per ASTM D-412 with a Tensile strength of at least 3000psi and ASTM D-624 with tear strength of at least 420lbs/in.
- Tanks are supplied with Brass trim valves and Teflon seats.
- All valves are labeled with working position and function.
- Permanently welded lifting lugs for easy tank movement and positioning.
Designed for Maximum agent discharge - Tanks are oversized to allow thermal expansion of foam concentrate if any
- Tanks are supplied with label identifying foam concentrate type, percentage ratio and tank size
- Tanks are Externally RED enamel coated and Internally Coal tar Epoxy coated
ABOVE GROUND STORAGE TANK
PRODUCT DESCRIPTION
NAFFCO’s Above Ground Storage Tank is designed for performance, durability, and reliability. The lightweight NAFFCO tank is performance engineered for safety and long service life. It is UL listed (manufacturing accordance UL 142) and has easily passed all tests for 100% primary containment.
These tanks are intended for installation and use in accordance with the flammable and combustible liquids code NFPA 30.
The basic features of primary containment tanks covered under this category include all containment spaces and their respective openings (vents, liquid fill/withdraw, level indicator, drain and other functional openings) with connection threaded fittings.
All tank-containment compartments have been factory leak-tested by the NAFFCO before shipping.
