021-35866991-2 | 021-35800017-18


NAFFCO landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply.

The landing valves are oblique type with flanged inlet and are manufactured to comply to Bs 5041 Part 1 standard with delivery hose connection and blank cap complying with Bs 336:2010 standard.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.


  • BSI Kitemark and LPCB certified.
  • Body material made of copper alloy to EN 1982
  • Hand wheel material made of grey cast iron to Bs EN 1561.
  • Blank cap material made of copper alloy to EN 1982.
  • Possible to replace the gland seal when under pressure with the valve fully closed.
  • Disc facing rubber is of replaceable type.
  • Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
  • The hand wheel is BLACK painted and body to RED.