Alarm Check Valve Assembly
DESCRIPTION
The alarm check valve is a water flow alarm device designed for vertical installation in the main supply to a wet pipe sprinkler system. When a flow of water from the system equals or exceeds that of a single sprinkler, the valve is to actuate a fire alarm.
SPECIFICATION
- Nominal Size : 80,100, 150 & 200 NB
- Maximum Working Pressure : 17.5 Bar (250 Psi)
- Mounting : Vertical
Dry Type Pillar Fire Hydrants
DISCRIPTION
- NAFFCO Fire Hydrants are designed to comply with ANSI/AWWA C502.
- Dry barrel design eliminates damage to the hydrant caused by freezing of the upper part.
- NAFFCO Fire Hydrants are designed for high performance and easy to install, maintain and repair.
- Excellent and proven flow characteristics.
- 2 x 2½” NH thread connectors for soft hose connection.
- 1 x 4½” NH thread pumper connection for fire trucks.
- 6” inlet connection complying to mechanical joint ANSI/AWWA C111/A21.11 or flange connection ASME B16.5 Class 150.
- Operation threads are corrosion protected and for easy operation.
- NAFFCO fire hydrants are high pressure rated to 250 psi compatible with today’s trends.
- Internal epoxy paint system gives high corrosion protection to hydrants.
- Advanced safety couplings and flange design reduces traffic damage to hydrant.
- Main valve is easily removed from either the bonnet flange or ground line flange.
SPECIFICATION
- Body Material: Ductile Iron.
- Nominal Pressure 250 psi., Test Pressure: 500 psi.
- O-ring sealed flanges at the bonnet ground line and shoe simplify maintenance by eliminating gasket adhesion at these points, making disassembly easier. The O-rings are easier than flat gaskets to position during reassembly, and provide superior pressure handling.
- Hold-down nut – features integral weather seal. Prevents unauthorized removal of hold-down nut or operating nut. Resilient wiper seal prevents water entry and protects from freezing; material resistant to sunlight deterioration. O-ring provides second level seal.
- Safety flange – breaks cleanly to help prevent barrel damage, but strong enough to withstand normal handling. Allows economical repair, adding of extension section, rotation or changing of upper barrel without excavation.
- Full flow openings – large, smooth radius hose and pumper openings reduce friction loss.
Under Ground Hydrant
DESCRIPTION
NAFFCO under ground fire hydrants are valves of screw down type and are suitable for a maximum working pressure of 16 bar.
The underground fire hydrants are manufactured to comply to BS 750:2012 and EN 14339:2005 standards with screwed outlet threaded to BS 336:2010 standard.
SPECIFICATION
| Model | NHYD058 | |
|---|---|---|
| Valve Type | Screw down (type 2C) | |
| Nominal Size & Flange Drilling | Flange-X Flange-Y Flange-Z | PN16, DN80, BS EN 1092-2 PN16, DN80, BS EN 1092-2 PN16, DN80, BS EN 1092-3 |
| Working Pressure | 16 Bar maximum | |
| Test Pressure (Body) | Body | 25 Bar |
| Seat | 20 Bar | |
| Flange Drilling | BS 4504 Part : 2 : 1974 Table : 16/21 | |
FEATURES
- BSI Kitemark certified
- Body material made of grey cast iron to BS 1503-3
- Material of spindle and threaded part of valves which engages with it is made of stainless steel to BS 10088-1
- Material for the screwed outlet is made of high tensile brass to BS 12163:2011
- Spindle sealings (two seals) is of the toroidal sealing ring (‘0’ ring) type and are capable of changing while the valve is under pressure and fully closed
- A wiper ring is positioned above the spindle sealing’s to prevent the ingress of foreign matter
- Each hydrant shot is blasted (inside and outside) to SA 2 1/2 std
- All cast iron parts are thoroughly cleaned and painted
Angle Hose Valve
DESCRIPTION
The Angle hose valve is manufactured as per NFPA 13 and most suitable for fire protection service outlet or with a hose rack assembly.
SPECIFICATION
| Model No. | NF-AV38 1.5″ Ø, Female NPT Inlet & Outlet |
|---|---|
| Model No. | NF-AV65 2.5″ Ø, Female NPT Inlet & Outlet |
| Angle Hose Valve Drain | 1.5″ & 2.5″ |
| Pressure Rating | 300 PSI |
| Material | Cast Brass |
| Hand Wheel | Cast Iron |
| Finish Standard | Rough Brass / Polished Brass |
| Optional | Bright Chrome Plated |
6″ x 4 Way Breeching Inlet
DECSCRIPTION
NAFFCO breeching inlets are suitable for installation on dry risers only, in a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances.
The breeching inlets are manufactured to comply with BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non-return valves.
The breeching inlets and its fittings are suitable for a normal working pressure of 10 bar.
SPECIFICATION
| Model No. | NWR 115 & NWRX 115 |
|---|---|
| Inlet Connection | 4 Nos. Male Instantaneous Connector Complying to BS 336 |
| Pressure Rating | Normal Working Pressure of 10 Bar |
| Nominal Size | 150 mm Ranged Outlet |
| Test Pressure | 20 Bar |
| Flange Drilling | BS 4504 Part : 2 : 1974 Table : 16/21 |
FEATURES
- BSI Kitemark & LPCB certified
- Body material made of spheroidal graphite cast iron (Ductile Iron) to BS 1563:2011
- Inlet connection and non-return valves material made of copper alloy to BS 12163:2011
- Each inlet connection is fitted with non-return valve and of spring loaded mushroom type
- Each breeching inlet is painted RED internally and externally
4″ x 2 Way Breeching Inlet
DESCRIPTION
NAFFCO breeching inlets are suitable for installation on dry risers only, in a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances.
The breeching inlets are manufactured to comply with BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non return valves.
The breeching inlets and its fittings are suitable for a normal working pressure of 10 bar.
SPECIFICATION
| Model No. | NDR 095 |
|---|---|
| Inlet Connection | 2 Nos. Male Instantaneous Connector Complying to BS 336 |
| Pressure Rating | Normal Working Pressure of 10 Bar |
| Nominal Size | 100 mm Flanged Outlet |
| Test Pressure | 20 Bar |
| Flange Drilling | BS 4504 Part: 2:1974 Table: 16/21 |
FEATURES
- BSI Kitemark and LPCB certified
- Body material made of spheroidal graphite cast iron (Ductile Iron) to BS 1563:2011
- Inlet connection and non-return valves material made of copper alloy to BS 12163:2011
- Each inlet connections are fitted with non-return valve and are of spring loaded mushroom type
- Each breeching inlet is painted RED internally and externally
Pressure Reducing Landing Valve
DESCRIPTION
NAFFCO pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.
These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar -12 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar.
SPECIFICATION
| Model No. | NWR 120 |
|---|---|
| Valve Type | Oblique, Pressure Reducing, Flanged Inlet |
| Pressure Rating | High Pressure Valve |
| Nominal Size | DN50 |
| Working Pressure | 20 Bar Maximum |
| Test Pressure | Valve Seat Test at 22 Bar • Body Test at 30 Bar |
| Flange Drilling | BS4504 Part: 2 :1974Table : 16/2 |
| Min. Water Flow Rate | 8.5 L/S @ 4 Bar Outlet Pressure |
| Min. Valve Pressure Regulating | 4-12 Bar |
FEATURES
- BSI Kitemark approved
- Body material made of copper alloy to EN 1982
- Hand wheel material made of grey cast iron to BS EN 1561
- Blank cap material made of copper alloy to EN 1982
- Possible to replace the gland seal when under pressure with the valve fully closed
- Disc facing rubber are of replaceable type
- Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use
- The hand wheel are BLACK painted and body to RED
Oblique Landing Valve, Male Threaded Inlet
DESCRIPTION
NAFFCO landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply.
The landing valves are oblique type with threaded inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.
SPECIFICATION
| Model No. | NDR 097 |
|---|---|
| Valve Type | Oblique, Threaded Inlet |
| Pressure Rating | Low Pressure Valve |
| Nominal Size | DN 21/2″ |
| Working Pressure | 15 Bar Maximum |
| Test Pressure | Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar |
| Water Flow Rate | 8.5 L/S @ 4 Bar Outlet Pressure |
FEATURES
- BSI Kitemark approved
- Body material made of copper alloy to BS EN 12163:1998
- Hand wheel material made of grey cast iron to BS EN 1561
- Blank cap material made of copper alloy to EN 1982
- Possible to replace the gland seal when under pressure with the valve fully closed
- Disc facing rubber are of replaceable type
- Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use
- The hand wheel is BLACK painted and body to RED
Oblique Landing Valve, Flanged Inlet
DESCRIPTION
NAFFCO landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply.
The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.
SPECIFICATION
| Model No. | NDR 098 |
|---|---|
| Valve Type | Oblique, Flanged Inlet |
| Pressure Rating | Low Pressure Valve |
| Nominal Size | DN50 |
| Working Pressure | 15 Bar Maximum |
| Test Pressure | Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar |
| Flange Drilling | BS 4504 Part 2:1974 Table:16/21 |
| Water Flow Rate | 8.5 L/S @ 4 Bar Outlet Pressure |
FEATURES
- BSI Kitemark and LPCB certified
- Body material made of copper alloy to EN 1982
- Hand wheel material made of grey cast iron to BS EN 1561
- Blank cap material made of copper alloy to EN 1982
- Possible to replace the gland seal when under pressure with the valve fully closed
- Disc facing rubber is of replaceable type
- Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use
- The hand wheel is BLACK painted and body to RED
Boxes for Dry Riser Inlets
DESCRIPTION
| S.No. | Model No. | Description | Dimension in mm (HxWxD) |
|---|---|---|---|
| 1 | NF-2WDRIC-SM | 4″ X 2 Way Box For Dry Riser Inlets, Surface Mounted, Horizontal | 595x395x295 |
| 2 | NF-4WDRIC-SM | 6″ X 4 Way Box For Dry Riser Inlets, Surface Mounted, Horizontal | 595x595x295 |
| 3 | NF-2WDRIC-SMA | 4″ X 2 Way Box For Dry Riser Inlets, Surface Mounted, Vertical | 395x595x295 |
| 4 | NF-2WDRIC-RT | 4″ X 2 Way Box For Dry Riser Inlets, Recessed Type | 595x395x295 |
| 5 | NF-4WDRIC-RT | 6″ X 4 Way Box For Dry Riser Inlets, Recessed Type | 595x595x295 |
| 6 | NF-2WDRIC-RTA | 4″ X 2 Way Box For Dry Riser Inlets, Recessed Type | 395x595x295 |