FOAM PORTABLE FIRE EXTINGUISHERS (AS/NZS 1841.4)

PRODUCT DISCRIPTION

NAFFCO stored pressure and catridge operated foam extinguishers are multipurpose, ideal for fires involving FOAM FIRE EXTINGUISHER – STORED PRESSURE / EXTERNAL CARTRIDGE TYPE volatile liquids and freely burning materials such as paper, cloth, wood and furniture.

Suitable for Class A and Class B fire risks.

FEATURES

  • AFFF (6%) synthetic Aqueous Film – Forming Foam Agent capable of fighting Class A, B fires.
  • Australian & New zealand standard As/Nzs 1841.4, certified by Global-Mark Pty Ltd.
  • High quality external polyster paint.
  • Thermoplastic internal coating to prevent corrosion.
  • Spray nozzle to provide high fire rating.
  • Controlled discharge.
  • Brass nickel chrome plated head valve with simple squeeze operation.
  • Unique gauge testing system.
  • Unique colour code handle and base (Optional).
  • Rechargeable and easy to service.

WET CHEMICAL FIRE EXTINGUISHERS (AS/NZS 1841.3)

PRODUCT DESCRIPTION

NAFFCO stored pressure type wet chemical extinguishers are used for cooking oil or fat fires where the spray can create a flame almost immediatel. Extinguishment happens while the wet chemical agent reacts with oil to form a soap like film to seal the surface of the oil and cool it down to prevent re-ignition.

Suitable for Class A and F fire risks.

FEATURES

  • Australian & New Zealand Standard AS/NZS 1841.3, certified by Global-Mark Pty Ltd.
  • High quality polyester paint.
  • Internally coated by thermoplastic coating powders blend of polyolefin to prevent corrosion.
  • Fire mist spray to prevent grease splashing.
  • Brass nickel chrome plated head valve with simple squeeze operation.
  • Unique gage testing system.
  • Unique color code handle and base (optional).
  • Rechargeable and easy to service.

WATER PORTABLE FIRE EXTINGUISHERS (AS/NZS 1841.2)

PRODUCT DESCRIPTION

NAFFCO stored pressure and catridge operated water extinguishers are characterised by their high performance, and simple method of operation ideal for tackling freely WATER FIRE EXTINGUISHER – STORED PRESSURE / EXTERNAL CARTRIDGE TYPE burning materials such as paper, cloth, wood and furniture. These are good general purpose fire extinguishers and widely used for their cost effectiveness.

FEATURES

  • Water, a liquid agent only recommended for fighting Class A Fire.
  • Australian & New Zealand Standard AS/NZS 1841.2, certified by Global-Mark Pty Ltd.
  • High quality external polyster paint.
  • Thermoplastic internal coating to prevent corrosion.
  • Spray nozzle to provide high fire rating.
  • Controlled discharge.
  • Brass nickel chrome plated head valve with simple squeeze operation.
  • Unique gauge testing system.
  • Unique colour code handle and base (Optional).
  • Rechargeable and easy to service.

ABC DRY POWDER PORTABLE FIRE EXTINGUISHERS (AS/NZS 1841.5)

PRODUCT DESCRIPTION

NAFFCO stored pressure type dry powder extinguishers are characterised by their high performance, simple method of operation and rapid fire knock down capability. They are suitable for tackling fires involving freely burning materials, petrol, oil, gas and electrical equipment. They are ideal for vehicle & marine risks. NAFFCO ABC powder extinguishers contain high performance powder and are one of the most powerful powder extinguishers in the world.

FEATURES

  • Monoammonium phosphate based dry chemical agent. Capable of fighting Class A, B, C and E fires.
  • Australian & New Zealand Standard AS/NZS 1841.5, certified by Global-Mark Pty Ltd.
  • High quality polyester paint.
  • Controlled discharge.
  • Brass nickel plated head valve with simple squeeze operation.
  • Unique gauge testing system.
  • Unique colour coded handle and base (optional).
  • Rechargeable and easy to service.

CO2 HIGH PRESSURE CYLINDERS

PRODUCT DESCRIPTION

NAFFCO’S CO2 cylinders are manufactured for fire fighting extinguishers.

They are manufactured with carbon steel seamless pipes conforming to DIN 2448/1629 standards of grade ST 52.0. Made by automatic CNC forming machines to required sizes, the cylinders are designed and manufactured to comply with BS EN ISO 9809-1:2010 standards.

FEATURES

  • Compliance to 97/23/EC (PED) 0086 (0036) is certified by M/sTUV, Suddeutschland, Germany
  • The inlet thread size is made to meet BS EN3-9 standards using W 28.8 x 14 TPI tap
  • Each cylinder is subjected to heat treatment to meet the design criteria for mechanical properties
  • Each cylinder is shot blasted to SA 2-1/2 grade and painted in RED
  • 2 kg and 5 kg capacity cylinders compliance to council directive 97/23/EC (PED) and Statutory instrument 1999 No.2001 is certified by BSI (0086)

SEMI-RIGID REEL HOSE

PRODUCT DESCRIPTION

NAFFCO semi-rigid reel hoses are suitable for use in fixed fire fighting system. The hoses are available in sizes of 19 mm and 25 mm inside diameter. The hoses are flexible so that it can be rolled and kept on a drum. The hose are intended for use at a maximum working pressure of 12 bar (1.2 MPa) and temperature range of -20°C to +60°C at ambient temperature condition in non aggresive or non-corrosive atmosphere. The semi-rigid reel hoses are manufactured to comply with BSEN 694:2001 standards.

FEATURES

  • Materials for inner lining and cover of hose are plasticized PVC compound
  • High tensile textile polyester yarn is used for reinforcement of hose.

FIRE HOSE REEL WITH SEMI-RIGID HOSE (AS/NZS 1221)

PRODUCT DESCRIPTION

NAFFCO fire hose reels provide a very effective fire fighting facility with a continuous supply of water available immediately. The construction and performance of a fire hose reel with semi-rigid hose ensures suitable installation in buildings and other construction works for use by the occupants. The fire hose reels are manufactured in both manual  and  automatic versions to comply to Bs EN 671-1:2012 standard with semi-rigid hose complying with EN 694:2001 standards.

FEATURES

  • Australian & New Zealand Standard AS/NZS 1221, certified by Global-Mark Pty Ltd.
  • The fire hose reels are capable of rotating in one plane (fixed type)or rotating in more than one plane with mounting on one of the following: swinging arm, swinging pipe or swinging door in manual and automatic version.
  • The automatic fire hose reels will open fully within 3 revolution of the reel.
  • The nozzle has SHUT, JET and SPRAY control settings.
  • The minimum flow rate of hose reels in JET and SPRAY setting at 220 kpa pressure; for 13mm nozzle is 0.24 L/S, for 19mm nozzle is 0.45 L/S and for 25mm nozzle is 0.55 L/S.
  • The effective throw range of discharge at 0.2 MPa (2 bar) pressure is 10 mtrs. in JET setting.
  • The reel discs are painted RED with printed user instructions.

KITEMARK AND LPCB APPROVED HOSE, TYPE 2

PRODUCT DESCRIPTION

Single jacket fire hose consists of an impermeable elastomeric lining, a synthetic fibre reinforcement and externally applied elastomeric coating to the reinforcement. Delivery hoses are non-percolating lay flat type used in fire fighting purposes. Hoses are suitable for use with couplings with the requirements of BS 336:2010 standards. Hose is intended for use at working pressure not exceeding 15 bar. Delivery hose are manufactured to comply BS 6391: 2009 Standards.

FEATURES

  • BSI Kitemark and LPCB Certified.
  • Light weight and flexible.
  • Hose belongs to Type 2 with Elastomeric lining, Synthetic fibre reinforcement and elastomeric coating on the reinforcement.
  • Hose provides good protection against the absorption of liquids and resistance of the reinforcement.
  • Anti rot and anti twist.
  • Hose with couplings are wound by Galvanized mild steel / SS wire.

UL LISTED HOSE

PRODUCT DESCRIPTION

The single jacket fire hose consists of 100% polyester plain-woven synthetic and natural rubber linings. This fire hose has very good resistance to ageing and abrasion. The light fire hose is suitable for normal situation.

The single jacket hose made of high tenacity polyester staple and polyester filaments. Lining is natural rubber. Jacket is plain. There is a special adhesion between the jacket and the rubber.

FEATURES

  • This durable, double jacket hose is constructed of 100% high tensile strength polyester yarns, both wrap and filler, and lined with a high-tech EPDM tube. Its engineered design guarantees minimum weight with maximum durability and flexibility. The UL Listed Double Jacket Fire Hose and its assemblies under these specifications shall be constructed with superior quality materials, manufactured in accordance with National Fire

PRESSURE REDUCING VALVE, FLANGED INLET

PRODUCT DESCRIPTION

NAFFCO pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.

These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar -12 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure upto 20 bar.

FEATURES

  • BsI Kitemark approved.
  • Body material made of copper alloy to EN 1982. • Hand wheel material made of grey cast iron to Bs EN 1561.
  • Blank cap material made of copper alloy to EN 1982. • Possible to replace the gland seal when under pressure with the valve fully closed.
  • Disc facing rubber are of replaceable type.
  • Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
  • The hand is painted black and the body is painted red.

OBLIQUE VALVE, MALE THREADED INLET

PRODUCT DESCRIPTION

NAFFCO landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply.

The landing valves are oblique type with threaded inlet and are manufactured to comply to Bs 5041 Part 1 standard with delivery hose connection and blank cap complying with Bs 336:2010 standard.

The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.

FEATURES

  • BsI Kitemark approved.
  • Body material made of copper alloy to EN 1982
  • Hand wheel material made of grey cast iron to Bs EN 1561.
  • Blank cap material made of copper alloy to EN 1982.
  • Possible to replace the gland seal when under pressure with the valve fully closed.
  • Disc facing rubber are of replaceable type.
  • Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
  • The hand wheel is BLACK painted and body to RED.

LANDING VALVES OBLIQUE VALVE, FLANGED INLET

PRODUCT DESCRIPTION

NAFFCO landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply.

The landing valves are oblique type with flanged inlet and are manufactured to comply to Bs 5041 Part 1 standard with delivery hose connection and blank cap complying with Bs 336:2010 standard.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.

FEATURES

  • BSI Kitemark and LPCB certified.
  • Body material made of copper alloy to EN 1982
  • Hand wheel material made of grey cast iron to Bs EN 1561.
  • Blank cap material made of copper alloy to EN 1982.
  • Possible to replace the gland seal when under pressure with the valve fully closed.
  • Disc facing rubber is of replaceable type.
  • Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
  • The hand wheel is BLACK painted and body to RED.