Single Jacket Fire Hose – Kitemark & LPCB Approved, Type 2
DESCRIPTION
Single jacket fire hose consists of an impermeable elastomeric lining, a synthetic fibre reinforcement and externally applied elastomeric coating to the reinforcement. Delivery hoses are non-percolating lay flat type used in fire fighting purpose. Hoses are suitable for use with couplings with the requirements of BS 336:2010 standards. Hose is intended for use at working pressure not exceeding 15 bar. Delivery hose are manufactured to comply BS 6391: 2009 Standards.
SPECIFICATION
| Model No. | NF-DH2-65R | NF-DH2-65W |
|---|---|---|
| Diameter (Inch.) | 2.5 | |
| Service Test Pressure (Bar/Psi) | 15/217 | |
| Hydrostatic Strength Test Presure (Bar/Psi) | 50/725 | |
| Standard Compliance/Approvals | BS 6391: 2009/ Kitemark & LPCB | |
*NH threaded. Storz & instantaneous coupling or other types are available upon request.
FEATURES
- BSI Kitemark and LPCB Certified.
- Light weight and flexible.
- Hose belongs to Type 2 with Elastomeric lining, Synthetic fibre reinforcement and elastomeric coating on the reinforcement.
- Hose give good protection against the absorption of liquids and resistance of the reinforcement.
- Anti rot and anti twist.
- Hose with couplings are wound by Galvanized mild steel / SS wire.
Hose Data
| Hose | Type 2 |
| Available Color | Red, White |
| Standard Length | 25/30 Meters |
Applications
- Industrial and rural fire brigades as well as building protection.
- For general industrial, commercial and civil engineering applications.
High Expansion Foam Generator
DESCRIPTION
NAFFCO Mobile Foam Generator is a high expansion foam generator designed to expand foam solution into many millions of tiny stable bubbles of foam. No other source of power such as electricity or gasoline engine is needed.
SPECIFICATION
| Model | Inlet | Flow | Foam Expansion Ratio | Induction Rate |
|---|---|---|---|---|
| NF-31-3 | 2½” NH Female (BS336 Optional) | 180 LPM @ 4 Bar | 700 times | 4.5 LPM |
| NF-6000P | 2½” NH Female (BS336 Optional) | 192 – 305 LPM | 450-650 (Bypass fully closed) 750-1000 (Bypass full open) | – |
| NF-6000F | 2½” BS Instantaneous | 150-230 (Bypass fully closed) 170-280 (Bypass full open) | 425-800 (Bypass fully closed) 700-1000 (Bypass full open) | – |
APPLICATIONS
NAFFCO Foam Generators can be used to protect the following typical hazards.
- Flammable liquid storage areas
- Liquefied natural gas storage and handling areas
- Paper products ware houses
- Hazardous waste storage areas and incineration plants
- Chemical storage areas
- Tire ware houses
- Mining and power stations
- Cable tunnels
- Air craft hangars
- Flammable liquid bottling areas
- Ships’ engine rooms and holds
- Cellars, basements and enclosed spaces
Low Expansion Foam Branch Pipes
DESCRIPTION
NAFFCO Foam Branch pipes are air aspirated nozzles for application of foam solution. They have been developed to combine superior throw with the ability to produce stable, cohesive foam. The unique design of these branch pipes results in the required expansion of the foam, ensures proper mixing in the tube & at the same time provides higher velocity to the emerging foam stream, giving excellent range.
SPECIFICATION
| Model | Performance | Inlet Pressure | Inlet |
|---|---|---|---|
| NF-500LXB225 | 225lpm | 65psi | 2 ½” Instantaneous |
| NF-500LXB450 | 450lpm | 65psi | 2 ½” Instantaneous |
| NF-500LXB | 340-455 LPM (89.8-123 GPM) | 6 – 10 Bar (87 – 145 PSI) | 2 ½” Instantaneous |
Balance Pressure Proportioning Skid
DESCRIPTION
NAFFCO Balanced Pressure Proportioning Pump Skids are designed to precisely proportion the foam concentrate into the water stream. The systems function over a range of flows and pressures. The Balanced Pressure Pump Proportioning System functions by maintaining an equal pressure in the foam concentrate inlet and water inlets to the proportioner, which allows the proportioner to be used over a wide range of pressure and flows.
FEATURES
- Compact design.
- Can be used with both fresh and sea water.
- Can add in options like foam concentrate tank on the skid if required.
- All foam concentrate valves, pipe and fittings are of stainless steel or brass material for compatibility with all types of foam concentrates
- All manual valves are of brass or bronze material with identification tag.
- Four proportioner options to cover a wide range of flow requirements.
- Foam Concentrate tank can be of GRP or Stainless Steel material.
- Pump skid supplied with manual override capabilities.
- Compatible with all NAFFCO foam.
APPLICATIONS
These systems are usually used to protect oil tank farms, aircraft hangars, marine docks, chemical processing plants, offshore oil platforms, loading racks, Flammable Liquid Warehouses etc.
Certified Horizontal Split Case Fire Pump
RATINGS
| Rated Capacity (US GPM) | Rated Pressure Range (PSI) |
|---|---|
| 500 | 118 – 239 |
| 750 | 108 – 280 |
| 1000 | 101 – 273 |
| 1250 | 134 – 263 |
| 1500 | 121 – 256 |
Fire Hose Reel with Semi-Rigid Hose – Kitemark/LPCB Approved
DESCRIPTION
NAFFCO fire hose reels provide a very effective fire fighting facility with a continuous supply of water available immediately. The construction and performance of a fire hose reel with semi-rigid hose ensures suitable installation in buildings and other construction works for use by the occupants. The fire hose reels are manufactured in both manual and automatic versions to comply to BS EN 671-1:2012 standard with semi-rigid hose complying with BSEN 694:2014 standards.
SPECIFICATION
| Type | Model No. | Hose Diameter & Length | Reel Height (A in mm) | Reel Width (B in mm) | Reel Depth (C in mm) |
|---|---|---|---|---|---|
| Swinging Arm (Plastic Nozzle) Cabinet Mounted Manual (Brush / Mirror Finish) | 19 NFH-020M/SS | 19mm (¾”) & 30m | 550 | 645 | 205 |
| 25 NFH-020M/SS | 25mm (1″) & 30m | 550 | 645 | 235 | |
| Swinging Arm (Brass chrome plated rotary Nozzle) Cabinet Mounted Manual (Brush / Mirror Finish) | 19 NFH-020M/SS-B | 19mm (¾”) & 30m | 550 | 645 | 205 |
| 25 NFH-020M/SS | 25mm (1″) & 30m | 550 | 645 | 235 | |
| Swinging Arm (Plastic Nozzle) Cabinet Mounted Manual (Red Painted) | 19 NFH-020M | 19mm (¾”) & 30m | 580 | 645 | 205 |
| 25 NFH-020M | 25mm (1″) & 30m | 580 | 645 | 235 | |
| Swinging Arm (Brass Chrome Plated Rotary Nozzle) Cabinet Mounted Manual (Red Painted) | 19 NFH-020M-B | 19mm (¾”) & 30m | 580 | 645 | 205 |
| 25 NFH-020M-B | 25mm (1″) & 30m | 580 | 645 | 235 | |
| Swinging Arm (Plastic Nozzle) Cabinet Mounted Automatic (Brush / Mirror Finish) | 19 NFH-020A/SS | 19mm (¾”) & 30m | 550 | 645 | 235 |
| 25 NFH-020A/SS | 25mm (1″) & 30m | 550 | 645 | 235 | |
| Swinging Arm (Brass Chrome Plated Rotary Nozzle Cabinet Mounted Automatic (Brush / Mirror Finish) | 19 NFH-020A/SS-B | 19mm (¾”) & 30m | 550 | 645 | 235 |
| 25 NFH-020A/SS-B | 25mm (1″) & 30m | 550 | 645 | 235 | |
| Swinging Arm (Plastic Nozzle) Cabinet Mounted Automatic (Red Painted) | 19 NFH-020A | 19mm (¾”) & 30m | 580 | 645 | 235 |
| 25 NFH-020A | 25mm (1″) & 30m | 580 | 645 | 235 | |
| Swinging Arm (Brass Chrome Plated Rotary Nozzle) Cabinet Mounted Automatic (Red Painted) | 19 NFH-020A-B | 19mm (¾”) & 30m | 580 | 645 | 235 |
| 25 NFH-020A-B | 25mm (1″) & 30m | 580 | 645 | 235 | |
| Swinging Pipe (Plastic Nozzle) Wall Mounted Manual (Brush / Mirror Finish) | 19 NFH-030M/SS | 19mm (¾”) & 30m | 550 | 580 | 200 |
| 25 NFH-030M/SS | 25mm (1″) & 30m | 550 | 580 | 245 | |
| Swinging Pipe (Brass Chrome Plated Rotary Nozzle) Wall Mounted Manual (Brush / Mirror Finish) | 19 NFH-030M/SS-B | 19mm (¾”) & 30m | 550 | 580 | 200 |
| 25 NFH-030M/SS-B | 25mm (1″) & 30m | 550 | 580 | 245 | |
| Swinging Pipe (Plastic Nozzle) Wall Mounted Manual (Red Painted) | 19 NFH-030M | 19mm (¾”) & 30m | 665 | 580 | 200 |
| 25 NFH-030M | 25mm (1″) & 30m | 665 | 580 | 245 | |
| Swinging Pipe (Brass Chrome Plated Rotary Nozzle) Wall Mounted Manual (Red Painted) | 19 NFH-030M-B | 19mm (¾”) & 30m | 665 | 580 | 200 |
| 25 NFH-030M-B | 25mm (1″) & 30m | 665 | 580 | 245 | |
| Swinging Pipe (Plastic Nozzle) Wall Mounted Automatic (Brush / Mirror Finish) | 19 NFH-030A/SS | 19mm (¾”) & 30m | 550 | 580 | 250 |
| 25 NFH-030A/SS | 25mm (1″) & 30m | 550 | 580 | 250 | |
| Swinging Pipe (Brass Chrome Plated Rotary Nozzle) Wall Mounted Automatic (Brush / Mirror Finish) | 19 NFH-030A/SS-B | 19mm (¾”) & 30m | 550 | 580 | 250 |
| 25 NFH-030A/SS-B | 25mm (1″) & 30m | 550 | 580 | 250 | |
| Swinging Pipe (Plastic Nozzle) Wall Mounted Automatic (Red Painted) | 19 NFH-030A | 19mm (¾”) & 30m | 665 | 580 | 250 |
| 25 NFH-030A | 25mm (1″) & 30m | 665 | 580 | 250 | |
| Swinging Pipe (Brass Chrome Plated Rotary Nozzle) Wall Mounted Automatic (Red Painted) | 19 NFH-030A-B | 19mm (¾”) & 30m | 665 | 580 | 250 |
| 25 NFH-030A-B | 25mm (1″) & 30m | 665 | 580 | 250 | |
| Manual (Plastic Nozzle) Fixed (Brush / Mirror Finish) | 19 NFH-040M/SS | 19mm (¾”) & 30m | 550 | 580 | 220 |
| 25 NFH-040M/SS | 25mm (1″) & 30m | 550 | 580 | 265 | |
| Manual (Brass Chrome Plated Rotary Nozzle) Fixed (Brush / Mirror Finish) | 19 NFH-040M/SS-B | 19mm (¾”) & 30m | 550 | 580 | 220 |
| 25 NFH-040M/SS-B | 25mm (1″) & 30m | 550 | 580 | 265 | |
| Manual (Plastic Nozzle) Fixed (Red Painted) | 19 NFH-040M | 19mm (¾”) & 30m | 625 | 580 | 220 |
| 25 NFH-040M | 25mm (1″) & 30m | 625 | 580 | 265 | |
| Manual (Brass Chrome Plated Rotary Nozzle) Fixed (Red Painted) | 19 NFH-040M-B | 19mm (¾”) & 30m | 625 | 580 | 220 |
| 25 NFH-040M-B | 25mm (1″) & 30m | 625 | 580 | 265 | |
| Automatic (Plastic Nozzle) Fixed (Brush / Mirror Finish) | 19 NFH-040A/SS | 19mm (¾”) & 30m | 550 | 580 | 220 |
| 25 NFH-040A/SS | 25mm (1″) & 30m | 550 | 580 | 260 | |
| Automatic (Brass Chrome Plated Rotary Nozzle) Fixed (Brush / Mirror Finish) | 19 NFH-040A/SS-B | 19mm (¾”) & 30m | 550 | 580 | 220 |
| 25 NFH-040A/SS-B | 25mm (1″) & 30m | 550 | 580 | 260 | |
| Automatic (Plastic Nozzle) Fixed (Red Painted) | 19 NFH-040A | 19mm (¾”) & 30m | 625 | 580 | 220 |
| 25 NFH-040A | 25mm (1″) & 30m | 625 | 580 | 260 | |
| Automatic (Brass Chrome Plated Rotary Nozzle) Fixed (Red Painted) | 19 NFH-040A-B | 19mm (¾”) & 30m | 625 | 580 | 220 |
| 25 NFH-040A-B | 25mm (1″) & 30m | 625 | 580 | 260 |
CHARACTERISTICS
- BSI Kitemark and LPCB certified.
- The fire hose reels are capable of rotating in one plane (fixed type)or rotating in more than one plane with mounting on one of the following: swinging arm, swinging pipe or swinging door in manual and automatic version.
- The automatic fire hose reels will open fully within 3 revolution of the reel.
- The nozzle have SHUT, JET and SPRAY control settings
- The minimum flow rate of hose reels in JET and SPRAY setting is 41 L/MIN. at 0.6 MPa (6 bar) pressure
- Setting in chrome platedrotary nozzle is 53Lpm at 0.6 Mpa (6 bar) pressure.
- The effective throw range of discharge at 0.2 MPa (2 bar) pressure is 10 mtrs. in JET setting.
- The reel discs are painted RED with printed instructions to use label.
Fire Hose Rack Assembly
DESCRIPTION
NAFFCO Fire hose racks are designed for use in controlling incipient fire by building occupant use and conform to NFPA 14 standards for CLASS II service. The Fire Hose Racks are manufactured to comply UL & FM standard.
SPECIFICATION
| Model | NHR 38V* | NHR 64V |
|---|---|---|
| FIRE HOSE | ||
| Fire Hose Type | Single jacket, Light weight Thermoplastic lining with high tenacity filament polyester yarn, UL listed | Single jacket, Light weight Thermoplastic lining with high tenacity filament polyester yarn, UL listed |
| Size & Color | 1½” x 30Mtr., White | 2½” x 30Mtr., White |
| Service Pressure | 250 PSI | 250 PSI |
| Proof Pressure | 500 PSI | 500 PSI |
| Burst Pressure | 750 PSI | 750 PSI |
| COUPLINGS | ||
| Type | 1-1½” NH Female Threaded Coupling, Brass | 2-½” NH Female Threaded Coupling, Brass |
| ANGLE VALVE | ||
| Working Pressure | 300 PSI | 300 PSI |
| Test Pressure | 600 PSI | 600 PSI |
| NOZZLE | ||
| Inlet Size | 1.5″ Female NST Threaded | 2.5″ Female NST Threaded |
| Discharge rate (in full spray pattern) | 130±5GPM @ 100PSI | 205±5GPM @ 100PSI |
Pressure reducing valve available upon request with FM approved rack assembly.
*UL/FM Approved
FEATURES
- Hose rack frame material made of Stainless Steel Gr.304.
- Provides an immediate water source for fire suppression.
- Easy individual operation.
- Max. Service pressure of the Fire Hose Rack Assembly up to 150psi.
- Hose rack is designed to hold the hose with movable pins for easy & quick operation at the time of Emergency.
- An automatic release mechanism allows water to flow through the hose after removal of the hose and nozzle.
- Standard assemblies include:
- Angle Valve or pressure reducing type valve (UL/FM approved)
- Hose Rack frame material made of stainless steel
- Brush Finish
- Mirror Finish
- RED (RAL 3000) Powder Coated Oven Baked
- Hose rack frame
- Hose rack nipple
- Hose coupling
- Fire Hose – 30 Mtr. (UL Listed)
- Fog nozzle. (UL approved)
Fire Rated Cable
DESCRIPTION
Certified by LPCB to meet fire test Standards – BS EN 50200:2006 + Annex E 30 minutes, BS EN 50200 PH30, PH60 & PH120 & BS 6387 CWZ. It is also fully approved to the Low Smoke & Zero Halogen requirements detailed by BS 5839-:2013 & BS7629-1:2008.
Shield ‘Premium’ Cable retains continuity for 30 minutes under fire conditions at 830°C, this demanding fire cable test includes a final 15 minutes under fire & water spray conditions while a mechanical shock is applied every 5 minutes throughout the full 30 minute test.
Catalogue
SPECIFICATION
| LPCB approved to | Fire Resistance Standard | BS EN 50200:2006 +Annex E 30 mins |
|---|---|---|
| Fire Resistance Standard | BS EN 50200:2006 PH120 | |
| Fire Resistance Standard | BS 6387:1994 Clause 11 CWZ | |
| Halogen Emission Standard | BS EN 50267-2-1:1999 | |
| Halogen Emission Standard | BS EN 61034-2:2005 | |
| Also for use with | Emergency Lighting | BS 5266-1:2005 |
| Voice Alarm Systems Standard | BS 5839-8:2008 | |
| Voice Communication Standard | BS 5839-9:2003 | |
| (Risk Assessment May Demand Mechanical Protection) | ||
| Materials | Drain Wire | 0.80mm Dia (0.50mm2) Tinned Copper |
| Conductors | Plain Annealed Copper | |
| Core Installation | Fire Resistant ZHLS Silicone | |
| Screening | Aluminium Foil | |
| Outer Sheath | Low Smoke Halogen Free Thermoplastic | |
| Working Voltage | Core to Core | 500V |
| Core to CPC | 300V | |
| Types | Outer Sheath Colours | Red, White or Black |
| Number of Cores | 2, 3 & 4 Core | |
| Inner Cores CSA | 1.0, 1.5, 2.5 & 4.0mm CSA | |
| Resistance | 1.0mm CSA | 18.1 Ohms / 1 Km |
| 1.5mm CSA | 12.1 Ohms / 1 Km | |
| 2.5mm CSA | 7.41 Ohms / 1 Km | |
| 4.0mm CSA | 4.61 Ohms / 1 Km | |
| Minimum Bend Radius | Radius = 6 x Diameter | |
| Operating Temp. | Minimum/Maximum | -40°C to +90°C |
| Installation Temp. | Minimum/Maximum | 0°C to +70°C |
| Voltage Drop (DC or Single Phase AC) | 1.0mm CSA | 44 Ohms mV / A / m |
| 1.5mm CSA | 29 Ohms mV / A / m | |
| 2.5mm CSA | 18 Ohms mV / A / m | |
| Approximate Overall Diameter | 2 Core | 1.0mm / 7.15mm |
| 1.5mm / 7.40mm | ||
| 2.5mm / 8.70mm | ||
| 3 Core | 1.0mm / 7.75mm | |
| 1.5mm / 8.55mm | ||
| 2.5mm / 9.20mm | ||
| 4 Core | 1.0mm / 8.00mm | |
| 1.5mm / 8.80mm | ||
| 2.5mm / 11.10mm | ||
| Approximate Weights | 2 Core with CPC | 1.0mm – 8.0 Kg / 100 m |
| 1.5mm – 9.5 Kg / 100 m | ||
| 2.5mm – 14.1 Kg / 100 m | ||
| 3 Core with CPC | 1.0mm – 9.5 Kg / 100 m | |
| 1.5mm – 12.9 Kg / 100 m | ||
| 2.5mm – 19.1 Kg / 100 m | ||
| 4 Core with CPC | 1.0mm – 10.9 Kg / 100 m | |
| 1.5mm – 14.5 Kg / 100 m | ||
| 2.5mm – 22.2 Kg / 100 m | ||
| Current Rating (Current Ratings listed are at 30°C Refer to BS7671/EE Wiring Regulations for de-rating factor.) | Cable Clipped (DC or Single Phase AC) | 1.0mm 15A |
| 1.5mm 19.5A | ||
| 2.5mm 27A | ||
| Enclosed (DC or Single Phase AC) | 1.0mm 13A | |
| 1.5mm 16.5A | ||
| 2.5mm 23A | ||
| Insulation Resistance | 10MÙ> at 5000V d.c. | |
FEATURES
- Reduced Installation time and costs
- Easy to install and Superb Working Flexibility
- All in one – Easy to Strip Outer Sheath
- No Separate Foil
- No Additional Fibre Wraps
- No mica tape on conductors
- No additional core separators to remove
- Cable Construction Provides High Level Data Protection
Open-Area Sounder
DESCRIPTION
SHIELD Open-Area Sounder has been designed for use in open areas and can be connected to any UL or SHIELD system.
FEATURES
- Self-test trouble monitoring
- Two volume settings 92dB(A) and 100dB(A)
- Synchronization of tones
- Individual and group addressing
- Available in red or white
- Loop-powered
- IP65 rated
Open-Area Sounder Beacon
DESCRIPTION
SHIELD UL Open-Area Sounder Beacon makes full use of the protocol and has been designed for use in indoor, outdoor and open-areas. When the fire system is being commissioned, a Magnetic Wandcan be used to adjust and test each sounder locally.
FEATURES
- 15 tone pairs
- Sounder and beacon are independently configurable
- Volume and tone settings are independently selectable from the control panel
- Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc.
- Soft start option, ideal for hospitals and nursing homes
- Group and global control for increased response time
Reflective Beam Detector
DESCRIPTION
The system comprises of a single unit incorporating an infra-red transmitter and receiver. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level is reached.
The system is designed to be mounted so the beam will project between 0.5 m and 0.6 m below and parallel to the ceiling. Lateral detection may be up to 9.144m on either side of the beam, providing a maximum total coverage area of up to 19,800 square feet (18.29 m x 100 m).
SPECIFICATION
| Operating Range | 5 – 120 m |
|---|---|
| Operating Voltage Range | 12 to 36 VDC ±10% |
| Operating Controller Current (with 1 or 2 Receivers) | 14 mA (constant) |
| Operating Transmitter Current | 8 mA (per Transmitter) |
| Power Down Reset Time | >20 seconds |
| Fire and Fault Relay Contacts | Resistive VFCO 2A @ 30 VDC |
| Operating Temp. (non-condensing) | -20°C to +55°C |
| Optical Wavelength | 850 nm |
| IP Rating | IP54 |
| Relative Humidity (non-condensing) | 93% |
| Dimension (W x H x L) & Weight | |
| Control Unit | 203 mm x 124 mm x 71 mm, 600 g |
| Transmitter & Receiver | 78 mm x 77 mm x 161 mm, 200 g |
FEATURES
- Easy set up and alignment
- Single compact housing
- Calibrated obscuration test filter included
- Microprocessor controlled
- Alarm latching or auto reset
- Automatic gain control
- 12 V DC or 24 V DC operation
- Separate alarm and trouble contacts
- Remote Test Station available
Auto Align Beam Detector
DESCRIPTION
The Alpha 5000 System is an auto-aligning, self-correcting infrared beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition, each system controller houses two pairs of fire and trouble relays, one per detector. Once the detector head is installed, using the easyfit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.
SPECIFICATION
| Primary Input Power | 14 to 36 V DC |
|---|---|
| Standby Current (Depending On Number Of Detector Heads) | Low Current : 5 mA to 8.5 mA @ 24 V DC High Current : 37 mA @ 24 V DC |
| Alarm Current | 5 mA to 8.5 mA @ 24 V DC depending on number of detector heads used |
| Relay Contacts | 1 A @ 30 V DC Resistive |
| Reset Time | 5 seconds maximum |
| Start Up Time | 45 seconds |
| Optical Wavelength | 850 nm |
| Temperature Rating UL Listed | 0°C to 38°C |
| Primary Input Power | 14 to 36 V DC |
| IP Rating | IP54 |
| Dimension (W x H x L) & Weight | |
| Head | 134 mm x 134 mm x 131 mm, 1470 g |
| Controller | 202 mm x 87 mm x 230 mm, 1470 g |
| Prism | 100 mm x 9.5 mm x 105 mm |
FEATURES
- Up to 2 Detector Heads reporting to One Ground Level Controller
- Built in Laser assisted prism mounting
- Auto-Alignment 2 to 4 minutes per head
- AutOptimise: Auto-Correction due to building shift
- Built-in electronic UL/ULC obscuration-acceptance fire test
- Contamination compensation
- Separate Trouble and Alarm relays for each of the 2 channels
- Password protected settings
- Programmable alarm thresholds: 10% – 60% in 1% increments
- Programmable Fault and Alarm delay: 2-30 Seconds