DESCRIPTION
(250 PSIG / 1725 kPa Service Pressure)
Hose interior is all synthetic, light weight, and are UL approved.
SPECIFICATION
| Hose Model | Size (inside) | Size (outside) | Wt. 100 (30.5M) Uncoupled | Coil Diameter 100’ (30.5M) | ||||
|---|---|---|---|---|---|---|---|---|
| in. | mm | in. | mm | lbs | kg | in. | cm | |
| NF-FH38PU | 1.5** | 38** | 1 11⁄16 | 43 | 10.4 | 4.7 | 11.5 | 29.2 |
| NF-FH65PU | 2.5** | 64** | 2 3⁄4 | 70 | 24.0 | 10.9 | 14.5 | 36.8 |
| Hose Model | Service Pressure | Proof Pressure | Burst Pressure | Standard Compliance/ Approvals | |||
|---|---|---|---|---|---|---|---|
| PSI | kPa | PSI | kPa | PSI | kPa | ||
| NF-FH38PU | 250 | 1725 | 500 | 3450 | 750 | 5175 | UL219, NFPA 1961/ UL Listed |
| NF-FH65PU | 250 | 1725 | 500 | 3450 | 750 | 5175 | |
| Couplings; NH threaded (1 1/2″ or 2 1/2″) in Brass or Aluminium Anodized. | |||||||
Storz & instantaneous coupling or other type available upon request.
CONSTRUCTION & FEATURES
- The hose is of single jacket construction.
- The jacket is made with high tenacity filament polyester yarn in both the warp and weft directions, to provide maximum strength to weight ratio.
- The hose is resistant to chemicals and petrol products, rot & mildew, hydrolysis, and resist deterioration due to exposure UV-rays and ozone.
PERFORMANCE
- The hose, in all sizes, have minimum service, test, and burst pressures as specified in the technical chart.
- The hose have a maximum flow with minimum friction loss.
- The hose have no defects, dirt, knots, lumps or other irregularities affecting the performance of the hose.
- The hose is resistant to kinking and remain flexible to -65°F(-53°C).
- Twisting and warping are at least 100% better than required, by the applicable NFPA standards.
Hose Data
| Available Colors | Red |
| Standard Lengths | 75ft, 100ft, 200ft, Other lengths available upon request. |
| Applicable Standards | UL219 |
APPLICATIONS
- Cabinet
- Fire Hose Reel
- Fire Hose Rack