Single Jacket Fire Hose – Kitemark & LPCB Approved, Type 2
DESCRIPTION
Single jacket fire hose consists of an impermeable elastomeric lining, a synthetic fibre reinforcement and externally applied elastomeric coating to the reinforcement. Delivery hoses are non-percolating lay flat type used in fire fighting purpose. Hoses are suitable for use with couplings with the requirements of BS 336:2010 standards. Hose is intended for use at working pressure not exceeding 15 bar. Delivery hose are manufactured to comply BS 6391: 2009 Standards.
SPECIFICATION
| Model No. | NF-DH2-65R | NF-DH2-65W |
|---|---|---|
| Diameter (Inch.) | 2.5 | |
| Service Test Pressure (Bar/Psi) | 15/217 | |
| Hydrostatic Strength Test Presure (Bar/Psi) | 50/725 | |
| Standard Compliance/Approvals | BS 6391: 2009/ Kitemark & LPCB | |
*NH threaded. Storz & instantaneous coupling or other types are available upon request.
FEATURES
- BSI Kitemark and LPCB Certified.
- Light weight and flexible.
- Hose belongs to Type 2 with Elastomeric lining, Synthetic fibre reinforcement and elastomeric coating on the reinforcement.
- Hose give good protection against the absorption of liquids and resistance of the reinforcement.
- Anti rot and anti twist.
- Hose with couplings are wound by Galvanized mild steel / SS wire.
Hose Data
| Hose | Type 2 |
| Available Color | Red, White |
| Standard Length | 25/30 Meters |
Applications
- Industrial and rural fire brigades as well as building protection.
- For general industrial, commercial and civil engineering applications.
Fire Hose Rack Assembly
DESCRIPTION
NAFFCO Fire hose racks are designed for use in controlling incipient fire by building occupant use and conform to NFPA 14 standards for CLASS II service. The Fire Hose Racks are manufactured to comply UL & FM standard.
SPECIFICATION
| Model | NHR 38V* | NHR 64V |
|---|---|---|
| FIRE HOSE | ||
| Fire Hose Type | Single jacket, Light weight Thermoplastic lining with high tenacity filament polyester yarn, UL listed | Single jacket, Light weight Thermoplastic lining with high tenacity filament polyester yarn, UL listed |
| Size & Color | 1½” x 30Mtr., White | 2½” x 30Mtr., White |
| Service Pressure | 250 PSI | 250 PSI |
| Proof Pressure | 500 PSI | 500 PSI |
| Burst Pressure | 750 PSI | 750 PSI |
| COUPLINGS | ||
| Type | 1-1½” NH Female Threaded Coupling, Brass | 2-½” NH Female Threaded Coupling, Brass |
| ANGLE VALVE | ||
| Working Pressure | 300 PSI | 300 PSI |
| Test Pressure | 600 PSI | 600 PSI |
| NOZZLE | ||
| Inlet Size | 1.5″ Female NST Threaded | 2.5″ Female NST Threaded |
| Discharge rate (in full spray pattern) | 130±5GPM @ 100PSI | 205±5GPM @ 100PSI |
Pressure reducing valve available upon request with FM approved rack assembly.
*UL/FM Approved
FEATURES
- Hose rack frame material made of Stainless Steel Gr.304.
- Provides an immediate water source for fire suppression.
- Easy individual operation.
- Max. Service pressure of the Fire Hose Rack Assembly up to 150psi.
- Hose rack is designed to hold the hose with movable pins for easy & quick operation at the time of Emergency.
- An automatic release mechanism allows water to flow through the hose after removal of the hose and nozzle.
- Standard assemblies include:
- Angle Valve or pressure reducing type valve (UL/FM approved)
- Hose Rack frame material made of stainless steel
- Brush Finish
- Mirror Finish
- RED (RAL 3000) Powder Coated Oven Baked
- Hose rack frame
- Hose rack nipple
- Hose coupling
- Fire Hose – 30 Mtr. (UL Listed)
- Fog nozzle. (UL approved)
Standard Branch Pipe
DESCRIPTION
NAFFCO standard branch pipe is made by metal, suitable to use with fire hose assembly for fire fighting purpose. The branch pipe has male instantaneous coupling inlet manufactured to comply with BS 336:2010 standards.
SPECIFICATION
| Model No. | NF SB 202A |
|---|---|
| Type | Standard branch pipe |
| Body and Nozzle Material | Aluminium to BS EN 1706 : 2010 |
| Inlet Connection | Male Instantaneous Coupling to BS 336:2010 |
| Nozzle Hole Diameter | 12.5mm |
| Working Pressure | 16 Bar |
| Test Pressure | 24 Bar |
FEATURES
- BSI Kitemark approved.
- Metal body material made of aluminium alloy.
Handheld Branch Pipe
DESCRIPTION
NAFFCO hand-held branch pipe is made by combination of Aluminium and plastics. The water flow control is by means of SHUT, JET and SPRAY. The branch pipe has male instantaneous coupling inlet.
FEATURES
- BSI Kitemark Certified
- Handheld Branch Pipes are manufactured in compliance with BS EN 15182-1:2007 & BS EN 15182-3:2007+ A1:2009
- Body and Tip made of Aluminium
- Pipe material made of Polyamide
APPLICATIONS
- Industrial and rural fire brigades as well as building protection.
- For general industrial, commercial and civil engineering applications.
- Ideal for Fire Departments and Professional Industry services.
- Refineries, Armed Forces, Airports, Ships, Oil Rigs, Heavy Industry
Maintenance Instructions
- Keep it in cover.
- After use drain the water and disconnect from hose.
- Every 6 months verify the lever operating & Jet/Spray
SPECIFICATION
| Model | NF-FB320 |
|---|---|
| Type | Handheld Controllable |
| Flow Control | Shut, Jet & Spray |
| Type of Spray | Full Cone |
| Inlet Connection | Male instantaneous coupling to BS 336 |
| Working Pressure | 16 Bar |
| Hydrostatic Test Pressure | 25.5 Bar |
| Flow Rate | 240 LPM @ 6 Bar(Jet) 230 LPM @ 6 Bar(Spray) |
| Length | 445 mm |
Delivery Hose Coupling
DESCRIPTION
NAFFCO couplings are suitable for use with delivery hose and for fire fighting purposes. The delivery hose couplings are of instantaneous pattern, pull release type with ribbed tail and are manufactured to comply to BS 336:2010 standards. The couplings are suitable for use at working pressure not exceeding 15 bar.
SPECIFICATION
| Coupling Type | Instantaneous Male / Female coupling with pull release |
|---|---|
| Tailed Ends | Ribbed Type |
| Test Pressure | 22.5 Bar per 1 minute |
| S. No. | Description | Material |
|---|---|---|
| 1 | Body Male/Female Coupling | a. Aluminium to BS 1706:1998 b. Copper Alloy to BS EN 12163:1998 |
| 2 | Washer | Rubber |
| 3 | Spring | Spring Steel |
| 4 | Self Locking Nut | Aluminium |
FEATURES
- BSI Kitemark and LPCB certified.
- Castings are clean, sound and free from gross porosity.
- Machined surface is within tolerance and is in accordance to BS 1134-2.
- Coupling washers are made of natural rubber to BS1154.
- Plungers are of self-locking type.
Duralex Fire Hose, UL Listed
DESCCRIPTION
Outer and Inner Layers
Specially formulated rubber, extruded through the tubular fabric. Minimum load loss thanks to its smooth liner surface. High temperature resistance.
Intermediate Textile Fabric Reinforcement
Jacket manufactured with tubular weave with high-tenacity polyester thread. Free of defects such as broken threads, knots, etc.
SPECIFICATION
| Model No. | Diameter | Weight | Thickness | |
|---|---|---|---|---|
| Inches | mm | gr/m | mm | |
| Duralex 38 | 1 ½” | 38 | 360 | 2.30 |
| Duralex 65 | 2 ½” | 64 | 575 | 3.60 |
| Model No. | Working Pressure | Test Pressure | Burst Pressure | Standard Compliance/ Approvals |
|---|---|---|---|---|
| bars | bars | bars | UL19, NFPA 1961/ UL Listed |
FEATURES
- Excellent resistance to abrasion and to intensive professional use.
- High resistance to oil, gasoline and wide range of chemicals.
- Highly resistant to both contact and radiant heat.
- Lightweight hose, remaining flexible even at low temperatures (-30°C).
- Easy to handle and wind up thanks to its great flexibility.
- High breaking resistance thanks to its special textile construction.
- No maintenance or drying required.
Hose Data
| Hose | Type 3 |
| Available Color | Red |
| Coupling | Instantaneous hose quick coupling (Aluminum/Brass). |
| Standard Length | 30 Meters, other lengths available upon request. |
Fields of Applications
- Ideal for Fire Departments and Professional Industry services.
- Refineries.
- Armed Forces.
- Airports.
- Ships and Oil Rigs.
- Heavy Industry.
Single Jacket Hose – UL Listed
DESCRIPTION
The single jacket fire hose consists of 100% polyester plain-woven synthetic and natural rubber linings. This fire hose has very good resistance to ageing and abrasion. The light fire hose is suitable for normal situation.
The single jacket hose made of high tenacity polyester staple and polyester filaments. Lining is natural rubber. Jacket is plain. There is a special adhesion between the jacket and the rubber.
SPEIFICATION
| Model No. | Diameter | Service Test Pressure (Bar/Psi) | Hydrostatic Strength Test Presure (Bar/Psi) | Standard Compliance/ Approvals |
|---|---|---|---|---|
| NF-FH38 | 1.5 | 14/200 | 50/725 | UL19,NFPA 1961/ UL listed |
| NF-FH65 | 2.5 | 14/200 | 50/725 |
*NH threaded. Storz & instantaneous coupling or other types are available upon request.
Single Jacket Fire Hose – Syntex60
DESCRIPTION
Single jacket fire hose consists of an impermeable elastomeric lining, a synthetic fibre reinforcement and externally applied elastomeric coating to the reinforcement. Delivery hoses are non-percolating lay flat type used in fire fighting purpose. Hoses are suitable for use with couplings with the requirements of BS 336:2010 standards. Hose is intended for use at working pressure not exceeding 15 bar. Delivery hose are manufactured to comply BS 6391: 2009 Standards.
SPECIFICATION
| Model No. | NF-DH2-65R | NF-DH2-65W |
|---|---|---|
| Diameter (Inch.) | 2.5 | |
| Service Test Pressure (Bar/Psi) | 15/217 | |
| Hydrostatic Strength Test Presure (Bar/Psi) | 50/725 | |
| Standard Compliance/Approvals | BS 6391: 2009/ Kitemark & LPCB | |
*NH threaded. Storz & instantaneous coupling or other types are available upon request.
FEATURES
- BSI Kitemark and LPCB Certified.
- Light weight and flexible.
- Hose belongs to Type 2 with Elastomeric lining, Synthetic fibre reinforcement and elastomeric coating on the reinforcement.
- Hose give good protection against the absorption of liquids and resistance of the reinforcement.
- Anti rot and anti twist.
- Hose with couplings are wound by Galvanized mild steel / SS wire.
Hose Data
| Hose | Type 2 |
| Available Color | Red, White |
| Standard Length | 25/30 Meters |
Applications
- Industrial and rural fire brigades as well as building protection.
- For general industrial, commercial and civil engineering applications.