NAFFCO Mobile Foam Generator is a high expansion foam generator designed to expand foam solution into many millions of tiny stable bubbles of foam. No other source of power such as electricity or gasoline engine is needed.
|Model||Inlet||Flow||Foam Expansion Ratio||Induction Rate|
|NF-31-3||2½” NH Female
|180 LPM @ 4 Bar||700 times||4.5 LPM|
|NF-6000P||2½” NH Female
|192 – 305 LPM||450-650 (Bypass fully closed)
750-1000 (Bypass full open)
|NF-6000F||2½” BS Instantaneous||150-230 (Bypass fully closed)
170-280 (Bypass full open)
|425-800 (Bypass fully closed)
700-1000 (Bypass full open)
NAFFCO Foam Generators can be used to protect the following typical hazards.
- Flammable liquid storage areas
- Liquefied natural gas storage and handling areas
- Paper products ware houses
- Hazardous waste storage areas and incineration plants
- Chemical storage areas
- Tire ware houses
- Mining and power stations
- Cable tunnels
- Air craft hangars
- Flammable liquid bottling areas
- Ships’ engine rooms and holds
- Cellars, basements and enclosed spaces
NAFFCO Foam Branch pipes are air aspirated nozzles for application of foam solution. They have been developed to combine superior throw with the ability to produce stable, cohesive foam. The unique design of these branch pipes results in the required expansion of the foam, ensures proper mixing in the tube & at the same time provides higher velocity to the emerging foam stream, giving excellent range.
|NF-500LXB225||225lpm||65psi||2 ½” Instantaneous|
|NF-500LXB450||450lpm||65psi||2 ½” Instantaneous|
|NF-500LXB||340-455 LPM (89.8-123 GPM)||6 – 10 Bar (87 – 145 PSI)||2 ½” Instantaneous|
NAFFCO Balanced Pressure Proportioning Pump Skids are designed to precisely proportion the foam concentrate into the water stream. The systems function over a range of flows and pressures. The Balanced Pressure Pump Proportioning System functions by maintaining an equal pressure in the foam concentrate inlet and water inlets to the proportioner, which allows the proportioner to be used over a wide range of pressure and flows.
- Compact design.
- Can be used with both fresh and sea water.
- Can add in options like foam concentrate tank on the skid if required.
- All foam concentrate valves, pipe and fittings are of stainless steel or brass material for compatibility with all types of foam concentrates
- All manual valves are of brass or bronze material with identification tag.
- Four proportioner options to cover a wide range of flow requirements.
- Foam Concentrate tank can be of GRP or Stainless Steel material.
- Pump skid supplied with manual override capabilities.
- Compatible with all NAFFCO foam.
These systems are usually used to protect oil tank farms, aircraft hangars, marine docks, chemical processing plants, offshore oil platforms, loading racks, Flammable Liquid Warehouses etc.
NAFFCO Foam Master is a self contained mobile foam unit which has been specially developed for the rapid deployment of foam extinguishing agent to fires and chemical spills. NAFFCO Foam Master can be operated by one person.
This unit is an ideal choice for the protection of smaller flammable liquid hazards such as boiler rooms, oil storage loading terminals and industrial sites.
|Model No.||NFM 150L||NFM 500|
|Foam Tank Capacity||150 Liters||500 Liters|
|Foam Tank Material||Stainless Steel (S.S.316 L)||Stainless Steel (S.S.316 L)|
|Foam Inductor||2″, 1-6% Variable||2 1/2″, 1-6% Variable|
|Foam Branch Pipe with ball valve||2″||2″|
|Fire Hose||1 1/2″ Dia 15M (2Nos)||2 1/2″ dia, 30m (2nos)|
|Wheels||Solid Rubber||R-13 Type|
Special Foam Nozzles and Branch pipes available as per request. Higher capacities available as per request.
Medium Expansion Foam Branch pipes are designed to produce large qualities of foam in situations requiring rapid foam cover with low water usage. It has the advantage of producing five times more foam with the same amount of water than compared to Low Expansion Foam Branch pipes.
- Nominal Size : NFB – 25,NFB – 40
- Flow Rate : 250 LPM,400 LPM @ 7 BAR
- Expansion Rate : 50
- Effective Reach : 6 To 8 Meters
- Effective Reach : 1 ½” BS Male (Instantaneous)
Naffco Foam Sprinkler Heads Mounted within the roof structure provides an even distribution of foam assuring fast flame knock down and fire control. They also provide cooling to the structure and protection from heat radiation.
|Model No.||Size||Spray Pattern||Flow Rate||Material|
|NH-500||1/2″ NPT||Upright/Pendent||61 – 111 LPM (as per UL)
136 LPM (as per FM)
|NH-520||1/2″ NPT||Pendent||31 gpm||Brass
|NH-550||3/4″ NPT||Pendent||50 gpm||Brass
|SD1010||1/2″ NPT||Pendent||12.2 Lpm/m²||Brass|
Pressure Propotioner is used to produce constant preset foam solution in pressure proportioning systems. It is designed to inject automatically the correct quantity of foam concentrate into a water stream over a wide flow rates by balancing the pressure of the foam concentrate with that of the water supply.
|Size||Flow Rate (LPM)|
(as per UL)
(as per FM)
(as per FM)
|65 NB||100 – 1550||78 – 1036||159 – 984||380 – 500|
|80 NB||260 – 3000||270 – 3000||270 – 3000||680 – 2900|
|100 NB||650 – 6000||660 – 5750||633 – 3922||1400 – 5800|
|150 NB||1200 – 12000||1090 – 9530||674 – 4012||2750 – 11600|
Line Proportioner offers a simple accurate method of proportioning when the water supply pressure is reasonably high. Each proportioner is designed for a set water pressure. However, higher or lower inlet pressure results in an increase or decrease in water flow with a change in proportioning.
|NF-350B (V)||Variable||386lpm (100gpm) ±5%|
|NF-350B (F)||Fixed||386lpm (100gpm) ±5%|
NAFFCO Pre-piped Bladder Tank is a complete self-contained proportioning system consisting of a bladder tank, ratio controller, and assembled piping. It is designed to inject foam concentrate into the water supply of a fire protection system and automatically proportions over a wide range of flow and pressures without the use of external power supply.
|Tank Shell||Carbon Steel, SA 516 Gr.70.|
|Bladder||Vinyl Based Polymer|
|Pressure Relief Valve
|Brass Construction with Set
Pressure @ 15 bar
|Internal Piping||Perforated PVC, sch. 80.|
|Flanges||ASTM A105, Class 150|
|Water Pipe||Carbon Steel. sch. 40.|
|Foam Pipes||Stainless Steel. sch. 40.|
|Sight Glass Valve||Sight Gauge with Shut Off &
|Painting External||Zinc Rich Primer with Red
|Painting Internal||Zinc Rich Primer with Coal Tar
- Require less space than foam pump skid
- Designed for maximum agent discharge
- Permanently welded lifting lugs for easy tank movement and positioning
- Tanks are Externally Red enamel coated and
- Internally Coal tar Epoxy coated.
NAFFCO FLUOROFOAM is a fluoroprotein foam concentrate containing C6 flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of a stabilised fluid foam which will cover a burning hydrocarbon fuel surface very rapidly. The water soluble fluorosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re-ignition and provides excellent protection against “burn-back” should any inaccessible pockets of fire remains.
|Model||3PUL-C6 – FP 3%||6PUL – FP 6%|
|Product||Fluoroprotein Foam||Fluoroprotein Foam|
|Appearance||Dark Brown Liquid||Dark Brown Liquid|
|Specific Gravity @ 25°C||1.13 ± 0.02||1.09 ± 0.02|
|pH @ 25°C||7.0 ± 0.5||7.0 ± 0.5|
|Viscosity @ 25°C||< 20 cSt||< 20 cSt|
|Suspended sediment (v/v)||< 0.3%||< 0.3%|
|Pour Point||Flows at -7°C||Flows at -7°C|
|*Foam Expansion||> 6||> 6|
|*Foam Drainage 25%||3 minutes 30 secs.||5 minutes|
NAFFCO FLUOROFOAM FFFP3AF and FFFP6AF are Film Forming Fluoroprotein Foam concentrates (FFFP) containing hydrolyzed protein and preservatives, together with a blend of fluorinated surfactants to achieve the maximum synergistic effect. The blend of flurochemicals selected is effective in reducing the surface tension of water as well as the interfacial tension between water and oil sufficiently low to give stable film on the surface of the fuel and as a result produce fire extinguishing rates superior to those obtained with synthetic based compounds.
|Model||FFFP3AF – FFFP 3%||FFFP6AF – FFFP 6%|
|Specific Gravity @ 25°C||1.17 ± 0.03||1.15 ± 0.03|
|pH @ 25°C||6.5 – 7.5||6.5 – 7.5|
|Viscosity @ 25°C||< 30 cSt||< 30 cSt|
|Suspended sediment (v/v)||< 0.1%||< 0.1%|
|Storage temperature||-15°C – +49°C||-15°C – +49°C|
|Foam Expansion||> 8||> 8|
|Foam Drainage 25%||3.5 minutes min.||3.5 minutes min.|
NAFFCO ECO BARID FOAM is high quality fluorine free foam which can be used at 1% to 6% concentration for different application. It can be used to extinguish fires caused by polar or hydrocarbon fuels. In addition to this ECO BARID is capable of extinguishing A, B, D & F CLASSES of fire and is suitable for the use with most types of proportioning & discharge devices andperforms excellently well when used with CAF systems. ECO BARID FOAM is 100% environmental friendly free from PFOA, PFOS & fluorine.
- Excellent wetting characteristics when used in combating Class A fuel type of fires
- If inadvertently frozen, thawing will render product completely serviceable again
- It is mostly suitable for use with medium and high expansion foam generators