Single Jacket Fire Hose – Kitemark & LPCB Approved, Type 2

DESCRIPTION

Single jacket fire hose consists of an impermeable elastomeric lining, a synthetic fibre reinforcement and externally applied elastomeric coating to the reinforcement. Delivery hoses are non-percolating lay flat type used in fire fighting purpose. Hoses are suitable for use with couplings with the requirements of BS 336:2010 standards. Hose is intended for use at working pressure not exceeding 15 bar. Delivery hose are manufactured to comply BS 6391: 2009 Standards.

SPECIFICATION

Model No. NF-DH2-65R NF-DH2-65W
Diameter (Inch.) 2.5
Service Test Pressure (Bar/Psi) 15/217
Hydrostatic Strength Test Presure (Bar/Psi) 50/725
Standard Compliance/Approvals BS 6391: 2009/ Kitemark & LPCB

*NH threaded. Storz & instantaneous coupling or other types are available upon request.

FEATURES

  • BSI Kitemark and LPCB Certified.
  • Light weight and flexible.
  • Hose belongs to Type 2 with Elastomeric lining, Synthetic fibre reinforcement and elastomeric coating on the reinforcement.
  • Hose give good protection against the absorption of liquids and resistance of the reinforcement.
  • Anti rot and anti twist.
  • Hose with couplings are wound by Galvanized mild steel / SS wire.

Hose Data

Hose Type 2
Available Color Red, White
Standard Length 25/30 Meters

Applications

  • Industrial and rural fire brigades as well as building protection.
  • For general industrial, commercial and civil engineering applications.

Fire Hose Reel with Semi-Rigid Hose – Kitemark/LPCB Approved

DESCRIPTION

NAFFCO fire hose reels provide a very effective fire fighting facility with a continuous supply of water available immediately. The construction and performance of a fire hose reel with semi-rigid hose ensures suitable installation in buildings and other construction works for use by the occupants. The fire hose reels are manufactured in both manual and automatic versions to comply to BS EN 671-1:2012 standard with semi-rigid hose complying with BSEN 694:2014 standards.

SPECIFICATION

Type Model No. Hose Diameter &
Length
Reel Height
(A in mm)
Reel Width
(B in mm)
Reel Depth
(C in mm)
Swinging Arm
(Plastic Nozzle)
Cabinet Mounted Manual
(Brush / Mirror Finish)
19 NFH-020M/SS 19mm (¾”) & 30m 550 645 205
25 NFH-020M/SS 25mm (1″) & 30m 550 645 235
Swinging Arm
(Brass chrome plated rotary Nozzle)
Cabinet Mounted Manual
(Brush / Mirror Finish)
19 NFH-020M/SS-B 19mm (¾”) & 30m 550 645 205
25 NFH-020M/SS 25mm (1″) & 30m 550 645 235
Swinging Arm
(Plastic Nozzle)
Cabinet Mounted Manual
(Red Painted)
19 NFH-020M 19mm (¾”) & 30m 580 645 205
25 NFH-020M 25mm (1″) & 30m 580 645 235
Swinging Arm
(Brass Chrome Plated Rotary Nozzle)
Cabinet Mounted Manual
(Red Painted)
19 NFH-020M-B 19mm (¾”) & 30m 580 645 205
25 NFH-020M-B 25mm (1″) & 30m 580 645 235
Swinging Arm
(Plastic Nozzle)
Cabinet Mounted Automatic
(Brush / Mirror Finish)
19 NFH-020A/SS 19mm (¾”) & 30m 550 645 235
25 NFH-020A/SS 25mm (1″) & 30m 550 645 235
Swinging Arm
(Brass Chrome Plated Rotary Nozzle
Cabinet Mounted Automatic
(Brush / Mirror Finish)
19 NFH-020A/SS-B 19mm (¾”) & 30m 550 645 235
25 NFH-020A/SS-B 25mm (1″) & 30m 550 645 235
Swinging Arm
(Plastic Nozzle)
Cabinet Mounted Automatic
(Red Painted)
19 NFH-020A 19mm (¾”) & 30m 580 645 235
25 NFH-020A 25mm (1″) & 30m 580 645 235
Swinging Arm
(Brass Chrome Plated Rotary Nozzle)
Cabinet Mounted Automatic
(Red Painted)
19 NFH-020A-B 19mm (¾”) & 30m 580 645 235
25 NFH-020A-B 25mm (1″) & 30m 580 645 235
Swinging Pipe
(Plastic Nozzle)
Wall Mounted Manual
(Brush / Mirror Finish)
19 NFH-030M/SS 19mm (¾”) & 30m 550 580 200
25 NFH-030M/SS 25mm (1″) & 30m 550 580 245
Swinging Pipe
(Brass Chrome Plated Rotary Nozzle)
Wall Mounted Manual
(Brush / Mirror Finish)
19 NFH-030M/SS-B 19mm (¾”) & 30m 550 580 200
25 NFH-030M/SS-B 25mm (1″) & 30m 550 580 245
Swinging Pipe
(Plastic Nozzle)
Wall Mounted Manual
(Red Painted)
19 NFH-030M 19mm (¾”) & 30m 665 580 200
25 NFH-030M 25mm (1″) & 30m 665 580 245
Swinging Pipe
(Brass Chrome Plated Rotary Nozzle)
Wall Mounted Manual
(Red Painted)
19 NFH-030M-B 19mm (¾”) & 30m 665 580 200
25 NFH-030M-B 25mm (1″) & 30m 665 580 245
Swinging Pipe
(Plastic Nozzle)
Wall Mounted Automatic
(Brush / Mirror Finish)
19 NFH-030A/SS 19mm (¾”) & 30m 550 580 250
25 NFH-030A/SS 25mm (1″) & 30m 550 580 250
Swinging Pipe
(Brass Chrome Plated Rotary Nozzle)
Wall Mounted Automatic
(Brush / Mirror Finish)
19 NFH-030A/SS-B 19mm (¾”) & 30m 550 580 250
25 NFH-030A/SS-B 25mm (1″) & 30m 550 580 250
Swinging Pipe
(Plastic Nozzle)
Wall Mounted Automatic
(Red Painted)
19 NFH-030A 19mm (¾”) & 30m 665 580 250
25 NFH-030A 25mm (1″) & 30m 665 580 250
Swinging Pipe
(Brass Chrome Plated Rotary Nozzle)
Wall Mounted Automatic
(Red Painted)
19 NFH-030A-B 19mm (¾”) & 30m 665 580 250
25 NFH-030A-B 25mm (1″) & 30m 665 580 250
Manual
(Plastic Nozzle)
Fixed
(Brush / Mirror Finish)
19 NFH-040M/SS 19mm (¾”) & 30m 550 580 220
25 NFH-040M/SS 25mm (1″) & 30m 550 580 265
Manual
(Brass Chrome Plated Rotary Nozzle)
Fixed
(Brush / Mirror Finish)
19 NFH-040M/SS-B 19mm (¾”) & 30m 550 580 220
25 NFH-040M/SS-B 25mm (1″) & 30m 550 580 265
Manual
(Plastic Nozzle)
Fixed
(Red Painted)
19 NFH-040M 19mm (¾”) & 30m 625 580 220
25 NFH-040M 25mm (1″) & 30m 625 580 265
Manual
(Brass Chrome Plated Rotary Nozzle)
Fixed
(Red Painted)
19 NFH-040M-B 19mm (¾”) & 30m 625 580 220
25 NFH-040M-B 25mm (1″) & 30m 625 580 265
Automatic
(Plastic Nozzle)
Fixed
(Brush / Mirror Finish)
19 NFH-040A/SS 19mm (¾”) & 30m 550 580 220
25 NFH-040A/SS 25mm (1″) & 30m 550 580 260
Automatic
(Brass Chrome Plated Rotary Nozzle)
Fixed
(Brush / Mirror Finish)
19 NFH-040A/SS-B 19mm (¾”) & 30m 550 580 220
25 NFH-040A/SS-B 25mm (1″) & 30m 550 580 260
Automatic
(Plastic Nozzle)
Fixed
(Red Painted)
19 NFH-040A 19mm (¾”) & 30m 625 580 220
25 NFH-040A 25mm (1″) & 30m 625 580 260
Automatic
(Brass Chrome Plated Rotary Nozzle)
Fixed
(Red Painted)
19 NFH-040A-B 19mm (¾”) & 30m 625 580 220
25 NFH-040A-B 25mm (1″) & 30m 625 580 260

CHARACTERISTICS

  • BSI Kitemark and LPCB certified.
  • The fire hose reels are capable of rotating in one plane (fixed type)or rotating in more than one plane with mounting on one of the following: swinging arm, swinging pipe or swinging door in manual and automatic version.
  • The automatic fire hose reels will open fully within 3 revolution of the reel.
  • The nozzle have SHUT, JET and SPRAY control settings
  • The minimum flow rate of hose reels in JET and SPRAY setting is 41 L/MIN. at 0.6 MPa (6 bar) pressure
  • Setting in chrome platedrotary nozzle is 53Lpm at 0.6 Mpa (6 bar) pressure.
  • The effective throw range of discharge at 0.2 MPa (2 bar) pressure is 10 mtrs. in JET setting.
  • The reel discs are painted RED with printed instructions to use label.

Fire Hose Rack Assembly

DESCRIPTION

NAFFCO Fire hose racks are designed for use in controlling incipient fire by building occupant use and conform to NFPA 14 standards for CLASS II service. The Fire Hose Racks are manufactured to comply UL & FM standard.

SPECIFICATION

Model NHR 38V* NHR 64V
FIRE HOSE
Fire Hose Type Single jacket, Light weight
Thermoplastic lining with high tenacity
filament polyester yarn, UL listed
Single jacket, Light weight
Thermoplastic lining with high tenacity
filament polyester yarn, UL listed
Size & Color 1½” x 30Mtr., White 2½” x 30Mtr., White
Service Pressure 250 PSI 250 PSI
Proof Pressure 500 PSI 500 PSI
Burst Pressure 750 PSI 750 PSI
COUPLINGS
Type 1-1½” NH Female Threaded Coupling,
Brass
2-½” NH Female Threaded Coupling,
Brass
ANGLE VALVE
Working Pressure 300 PSI 300 PSI
Test Pressure 600 PSI 600 PSI
NOZZLE
Inlet Size 1.5″ Female NST Threaded 2.5″ Female NST Threaded
Discharge rate
(in full spray pattern)
130±5GPM @ 100PSI 205±5GPM @ 100PSI

Pressure reducing valve available upon request with FM approved rack assembly.
*UL/FM Approved

FEATURES

  • Hose rack frame material made of Stainless Steel Gr.304.
  • Provides an immediate water source for fire suppression.
  • Easy individual operation.
  • Max. Service pressure of the Fire Hose Rack Assembly up to 150psi.
  • Hose rack is designed to hold the hose with movable pins for easy & quick operation at the time of Emergency.
  • An automatic release mechanism allows water to flow through the hose after removal of the hose and nozzle.
  • Standard assemblies include:
    • Angle Valve or pressure reducing type valve (UL/FM approved)
    • Hose Rack frame material made of stainless steel
      • Brush Finish
      • Mirror Finish
      • RED (RAL 3000) Powder Coated Oven Baked
    • Hose rack frame
    • Hose rack nipple
    • Hose coupling
    • Fire Hose – 30 Mtr. (UL Listed)
    • Fog nozzle. (UL approved)

Alarm Check Valve Assembly

DESCRIPTION

The alarm check valve is a water flow alarm device designed for vertical installation in the main supply to a wet pipe sprinkler system. When a flow of water from the system equals or exceeds that of a single sprinkler, the valve is to actuate a fire alarm.

SPECIFICATION

  • Nominal Size : 80,100, 150 & 200 NB
  • Maximum Working Pressure : 17.5 Bar (250 Psi)
  • Mounting : Vertical

Dry Type Pillar Fire Hydrants

DISCRIPTION

  • NAFFCO Fire Hydrants are designed to comply with ANSI/AWWA C502.
  • Dry barrel design eliminates damage to the hydrant caused by freezing of the upper part.
  • NAFFCO Fire Hydrants are designed for high performance and easy to install, maintain and repair.
  • Excellent and proven flow characteristics.
  • 2 x 2½” NH thread connectors for soft hose connection.
  • 1 x 4½” NH thread pumper connection for fire trucks.
  • 6” inlet connection complying to mechanical joint ANSI/AWWA C111/A21.11 or flange connection ASME B16.5 Class 150.
  • Operation threads are corrosion protected and for easy operation.
  • NAFFCO fire hydrants are high pressure rated to 250 psi compatible with today’s trends.
  • Internal epoxy paint system gives high corrosion protection to hydrants.
  • Advanced safety couplings and flange design reduces traffic damage to hydrant.
  • Main valve is easily removed from either the bonnet flange or ground line flange.

SPECIFICATION

  • Body Material: Ductile Iron.
  • Nominal Pressure 250 psi., Test Pressure: 500 psi.
  • O-ring sealed flanges at the bonnet ground line and shoe simplify maintenance by eliminating gasket adhesion at these points, making disassembly easier. The O-rings are easier than flat gaskets to position during reassembly, and provide superior pressure handling.
  • Hold-down nut – features integral weather seal. Prevents unauthorized removal of hold-down nut or operating nut. Resilient wiper seal prevents water entry and protects from freezing; material resistant to sunlight deterioration. O-ring provides second level seal.
  • Safety flange – breaks cleanly to help prevent barrel damage, but strong enough to withstand normal handling. Allows economical repair, adding of extension section, rotation or changing of upper barrel without excavation.
  • Full flow openings – large, smooth radius hose and pumper openings reduce friction loss.

Under Ground Hydrant

DESCRIPTION

NAFFCO under ground fire hydrants are valves of screw down type and are suitable for a maximum working pressure of 16 bar.

The underground fire hydrants are manufactured to comply to BS 750:2012 and EN 14339:2005 standards with screwed outlet threaded to BS 336:2010 standard.

SPECIFICATION

Model NHYD058
Valve Type Screw down (type 2C)
Nominal Size & Flange Drilling Flange-X
Flange-Y
Flange-Z
PN16, DN80, BS EN 1092-2
PN16, DN80, BS EN 1092-2
PN16, DN80, BS EN 1092-3
Working Pressure 16 Bar maximum
Test Pressure (Body) Body 25 Bar
Seat 20 Bar
Flange Drilling BS 4504 Part : 2 : 1974 Table : 16/21

FEATURES

  • BSI Kitemark certified
  • Body material made of grey cast iron to BS 1503-3
  • Material of spindle and threaded part of valves which engages with it is made of stainless steel to BS 10088-1
  • Material for the screwed outlet is made of high tensile brass to BS 12163:2011
  • Spindle sealings (two seals) is of the toroidal sealing ring (‘0’ ring) type and are capable of changing while the valve is under pressure and fully closed
  • A wiper ring is positioned above the spindle sealing’s to prevent the ingress of foreign matter
  • Each hydrant shot is blasted (inside and outside) to SA 2 1/2 std
  • All cast iron parts are thoroughly cleaned and painted

Angle Hose Valve

DESCRIPTION

The Angle hose valve is manufactured as per NFPA 13 and most suitable for fire protection service outlet or with a hose rack assembly.

SPECIFICATION

Model No. NF-AV38 1.5″ Ø, Female NPT Inlet & Outlet
Model No. NF-AV65 2.5″ Ø, Female NPT Inlet & Outlet
Angle Hose Valve Drain 1.5″ & 2.5″
Pressure Rating 300 PSI
Material Cast Brass
Hand Wheel Cast Iron
Finish Standard Rough Brass / Polished Brass
Optional Bright Chrome Plated

6″ x 4 Way Breeching Inlet

DECSCRIPTION

NAFFCO breeching inlets are suitable for installation on dry risers only, in a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances.

The breeching inlets are manufactured to comply with BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non-return valves.

The breeching inlets and its fittings are suitable for a normal working pressure of 10 bar.

SPECIFICATION

Model No. NWR 115 & NWRX 115
Inlet Connection 4 Nos. Male Instantaneous Connector Complying to BS 336
Pressure Rating Normal Working Pressure of 10 Bar
Nominal Size 150 mm Ranged Outlet
Test Pressure 20 Bar
Flange Drilling BS 4504 Part : 2 : 1974 Table : 16/21

FEATURES

  • BSI Kitemark & LPCB certified
  • Body material made of spheroidal graphite cast iron (Ductile Iron) to BS 1563:2011
  • Inlet connection and non-return valves material made of copper alloy to BS 12163:2011
  • Each inlet connection is fitted with non-return valve and of spring loaded mushroom type
  • Each breeching inlet is painted RED internally and externally

4″ x 2 Way Breeching Inlet

DESCRIPTION

NAFFCO breeching inlets are suitable for installation on dry risers only, in a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances.

The breeching inlets are manufactured to comply with BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non return valves.

The breeching inlets and its fittings are suitable for a normal working pressure of 10 bar.

SPECIFICATION

Model No. NDR 095
Inlet Connection 2 Nos. Male Instantaneous Connector Complying to BS 336
Pressure Rating Normal Working Pressure of 10 Bar
Nominal Size 100 mm Flanged Outlet
Test Pressure 20 Bar
Flange Drilling BS 4504 Part: 2:1974 Table: 16/21

FEATURES

  • BSI Kitemark and LPCB certified
  • Body material made of spheroidal graphite cast iron (Ductile Iron) to BS 1563:2011
  • Inlet connection and non-return valves material made of copper alloy to BS 12163:2011
  • Each inlet connections are fitted with non-return valve and are of spring loaded mushroom type
  • Each breeching inlet is painted RED internally and externally

Pressure Reducing Landing Valve

DESCRIPTION

NAFFCO pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.

These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar -12 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar.

SPECIFICATION

Model No. NWR 120
Valve Type Oblique, Pressure Reducing, Flanged Inlet
Pressure Rating High Pressure Valve
Nominal Size DN50
Working Pressure 20 Bar Maximum
Test Pressure Valve Seat Test at 22 Bar • Body Test at 30 Bar
Flange Drilling BS4504 Part: 2 :1974Table : 16/2
Min. Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure
Min. Valve Pressure Regulating 4-12 Bar

FEATURES

  • BSI Kitemark approved
  • Body material made of copper alloy to EN 1982
  • Hand wheel material made of grey cast iron to BS EN 1561
  • Blank cap material made of copper alloy to EN 1982
  • Possible to replace the gland seal when under pressure with the valve fully closed
  • Disc facing rubber are of replaceable type
  • Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use
  • The hand wheel are BLACK painted and body to RED

Oblique Landing Valve, Male Threaded Inlet

DESCRIPTION

NAFFCO landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply.

The landing valves are oblique type with threaded inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.

The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.

SPECIFICATION

Model No. NDR 097
Valve Type Oblique, Threaded Inlet
Pressure Rating Low Pressure Valve
Nominal Size DN 21/2″
Working Pressure 15 Bar Maximum
Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar
Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure

FEATURES

  • BSI Kitemark approved
  • Body material made of copper alloy to BS EN 12163:1998
  • Hand wheel material made of grey cast iron to BS EN 1561
  • Blank cap material made of copper alloy to EN 1982
  • Possible to replace the gland seal when under pressure with the valve fully closed
  • Disc facing rubber are of replaceable type
  • Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use
  • The hand wheel is BLACK painted and body to RED