Certified Fuel Tank

DESCRIPTION

NAFFCO certified primary containment tank offers you a reliable solution for your fuel storage requirements related to fire pump diesel engine applications as required by NFPA 20. Design and fabrication of these tanks are done as per UL standard (UL 142), and installation and use shall be in accordance with NFPA 30.

Each tank is subjected to thorough structural inspections and leakage test as specified by the design standard. The tanks that successfully pass the inspection and test are labelled as per UL specifications confirming their UL certification. These cylindrical, horizontally mounted, tanks are provided with necessary fittings and openings to facilitate quality service at field.

SPECIFICATION

Tank Capacity
(US Gallons)
Dia.
(mm)
Length
(mm)
Leg Width
(mm)
706001050430
1508001250575
25010001325720
31010701450768.5

Certified Jockey Pump Controllers

DESCRIPTION

NAFFCO Jockey Pump Controllers are listed by Underwriters Laboratories (UL file number E309408), in accordance with UL 508A (Standard for Industrial Control Panel), NFPA 70 (National Electric Code) and NEMA Standards.

Power ratings vary from 1.5 to 40 horsepower, 380 to 415 volts, 50 or 60 Hz.

Only high quality UL listed or UL recognized components are used in these panels to guarantee the best possible reliability. Also high quality UL listed enclosures are used.

The controller is completely wired, assembled and tested at the factory before shipment, and ready for immediate installation.

SPECIFICATION

NFY-JDO1 – Direct On Line Type

Power (HP)Rated Voltage (VAC)Frequency (Hz)Rated
Current (A)
Short Circuit
Current (kA)
Enclosure Size (mm)
1.5380-41550 or 603.35500 (H) x 400 (W) x 250 (D)
2380-41550 or 604.35500 (H) x 400 (W) x 250 (D)
3380-41550 or 606.15500 (H) x 400 (W) x 250 (D)
5380-41550 or 609.75500 (H) x 400 (W) x 250 (D)
7.5380-41550 or 60145500 (H) x 400 (W) x 250 (D)
10380-41550 or 60185500 (H) x 400 (W) x 250 (D)
15380-41550 or 60275500 (H) x 400 (W) x 250 (D)
20380-41550 or 60345500 (H) x 400 (W) x 250 (D)
25380-41550 or 60445600 (H) x 500 (W) x 250 (D)
30380-41550 or 60515600 (H) x 500 (W) x 250 (D)
40380-41550 or 60665600 (H) x 500 (W) x 250 (D)

NFY-JSD1 – Star – Delta Open Transition Type

Power (HP)Rated Voltage (VAC)Frequency (Hz)Rated
Current (A)
Short Circuit
Current (kA)
Enclosure Size (mm)
1.5380-41550 or 603.35500 (H) x 400 (W) x 250 (D)
2380-41550 or 604.35500 (H) x 400 (W) x 250 (D)
3380-41550 or 606.15500 (H) x 400 (W) x 250 (D)
5380-41550 or 609.75500 (H) x 400 (W) x 250 (D)
7.5380-41550 or 60145500 (H) x 400 (W) x 250 (D)
10380-41550 or 60185500 (H) x 400 (W) x 250 (D)
15380-41550 or 60275500 (H) x 400 (W) x 250 (D)
20380-41550 or 60345500 (H) x 400 (W) x 250 (D)
25380-41550 or 60445600 (H) x 500 (W) x 250 (D)
30380-41550 or 60515600 (H) x 500 (W) x 250 (D)
40380-41550 or 60665600 (H) x 500 (W) x 250 (D)

Certified Diesel Fire Pump Controllers

DESCRIPTION

NAFFCO Microprocessor Based Fire Pump Diesel Engine Controller are listed by Underwriters Laboratories (UL file number EX15064), in accordance with UL 218 (Standard for Fire Pump Controller), UL 508a (Standard for Industrial Control Panel), NFPA 20 (National Fire Protection Association Pamphlet 20 – Standard for Centrifugal Fire Pumps), NFPA 70 (National Electric Code) and NEMA standards.

Also approved by FM approvals (Factory Mutual), in accordance with FM standard 1321 / 1323 (Standard for Fire Pump Controller).

Power ratings suitable for 12/24 volts DC operating voltage, 110 / 220 volts AC input voltage, 50/60 Hz. These controllers are compatible with most types of diesel engines used for fire pump applications.

Only high quality UL listed or UL recognized components are used in these panels to guarantee the best possible reliability. Also high quality UL listed enclosures are used.

This controller is completely wired, assembled and tested at the factory before shipment, and ready for immediate installation.

SPECIFICATION

DC
Voltage (VDC)
Line
Voltage (VAC)
Enclosure
Size (mm)
12220/110900 (H) x 600 (W) x 300 (D)
24220/110900 (H) x 600 (W) x 300 (D)

Certified Electric Fire Pump Controllers

DESCRIPTION

NAFFCO Microprocessor Based Electric Motor Controllers for fire pumps are listed by Underwriters Laboratories (UL file number EX15064), in accordance with UL 218 (Standard for Fire Pump Controller), UL 508a (Standard for Industrial Control Panel), NFPA 20 (National Fire Protection Association Pamphlet 20- Standard for Centrifugal Fire Pumps), NFPA 70 (National Electric Code) and NEMA standards.

Also approved by FM approvals (Factory Mutual), in accordance with FM standard 1321 / 1323 (Standard for Fire Pump Controller).

Power ratings vary from 40 to 400 horsepower, 230 / 380 / 415 VAC, 50/60 Hz.

Only high quality UL listed or UL recognized components are used in these panels to guarantee the best possible reliability. Also high quality UL listed enclosures are used

This controller is completely wired, assembled, programmed and tested at the factory before shipment, and ready for immediate installation.

SPECIFCATION

MODEL – STARTING TYPE

NFY-DOM1 – Direct On Line

Motor Power (HP)Rated Voltage (V)Frequency (Hz)Rated
Current (A)
Short Circuit
Current (kA)
15380 – 41550 / 6027100
2034
2544
3051
4066
5083
60103
75128
100165
125208
150240
200320
250403
300482
350560
400636

NFY-SDM1 – Star Delta Open Transition

Motor Power (HP)Rated Voltage (V)Frequency (Hz)Rated
Current (A)
Short Circuit
Current (kA)
15380 – 41550 / 6027100
2034
2544
3051
4066
5083
60103
75128
100165
125208
150240
200320
250403
300482
350560
400636

AUTOMATIC POWER TRANSFER SWITCH

Motor Power (HP)Rated Voltage (V)Frequency (Hz)Rated
Current (A)
Short Circuit
Current (kA)
15380 – 41550 / 6027100
2034
2544
3051
4066
5083
60103
75128
100165
125208
150240
200320
250403
300482
350560
400636

AUTOMATIC POWER TRANSFER SWITCH
NFY-ATS – Auto Transfer Switch

Power Rating15 – 400 HP
Frequency50/60 Hz
Rated Voltage380 – 415 V

Certified Diesel Engine

DESCRIPTION

Fire Driver® diesel engines are specially designed and manufactured for fire fighting applications according to UL1247 standard. The better torque characteristics of these engines ensure reliable operation in emergency conditions. These engines are UL listed and comply with the requirements for diesel engine drives as detailed in NFPA 20.

Engines are run tested at the factory prior to the dispatch to ensure that they meet the certified performance ratings.

SPECIFICATION

FD 30 H19 hp2900 rpm
FD 50 H36 hp2900 rpm
FD 80 H50 hp2900 rpm
FD 80 R50 hp2900 rpm
FD 110 R87 hp2900 rpm
FD 140 H127 hp2900 rpm
FD 180 H185 hp2900 rpm
FD 225 H225 hp2900 rpm

Certified Electric Motor

DESCRIPTION

National Motors’ NMCM series consists of motors designed for fire pump applications as specified in NFPA 20 (Standard for the Installation of Stationary Pumps for Fire Protection). They are certified by UL as per the requirement of UL 1004-5 ‘Standard for Fire Pump Motors’. These three phase horizontal low-voltage squirrel-cage medium induction motors are constructed and manufactured as per the requirements of NEMA MG 1 standard Design B. These certified motors are compliant with the motor efficiency requirements as given in the EISA (Energy Independence and Security Act of 2007).

RANGES

Series: NMCM
Power Rating15 – 350 HP
Speed2920 – 2945 RPM
Voltage400 – 415 V AC
Phase3 PH
Frequency50 HZ
EnclosureODP
Ceritfied Fire Pump Sets - UL Listed / FM Approved> Product

    array(8) { ["_vc_post_settings"]=> array(2) { [0]=> string(30) "a:1:{s:10:"vc_grid_id";a:0:{}}" [1]=> string(30) "a:1:{s:10:"vc_grid_id";a:0:{}}" } ["slide_template"]=> array(1) { [0]=> string(7) "default" } ["_wpb_vc_js_status"]=> array(1) { [0]=> string(4) "true" } ["_custom_page_options"]=> array(5) { [0]=> string(32) "a:1:{s:7:"sidebar";s:5:"right";}" [1]=> string(32) "a:1:{s:7:"sidebar";s:5:"right";}" [2]=> string(32) "a:1:{s:7:"sidebar";s:5:"right";}" [3]=> string(32) "a:1:{s:7:"sidebar";s:5:"right";}" [4]=> string(32) "a:1:{s:7:"sidebar";s:5:"right";}" } ["_dp_original"]=> array(1) { [0]=> string(4) "1233" } ["_edit_lock"]=> array(1) { [0]=> string(12) "1538114293:1" } ["_edit_last"]=> array(1) { [0]=> string(1) "1" } ["_thumbnail_id"]=> array(1) { [0]=> string(4) "1383" } }